PaREGEn project deliverables
The page lists 11 deliverables related to the research project "PaREGEn".
List of Deliverables
| title and desprition | type | last update |
|---|---|---|
Report on 3D CFD simulation method for in-cylinder soot simulation, involving the chemical mechanism for gasoline and PAH combustion.Word file describing the reduced chemical mechanism and 3D model development for engine soot simulation coupling and GDI operation application Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-04-14 |
Newsletter 1/3, 2/3 and 3/3 (M10, M22, M36).The Deliverable D6.3 will be reported as a short report describing the Newsletter 1/3, 2/3 and 3/3 at M10, M22 and M36. The newsletters itself will be distributed in an electronic way with mailing programs like MailChimp or similar with clear links to the website. Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-04-14 |
Fast 0D simulation method and models for the virtual sensors adapted to the demonstrator engines.The report will describe the objectives, achievements, issues of the Fast 0D simulation method and models for the virtual sensors adapted to the demonstrator engines. Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-04-14 |
PaREGEn Impact Report.A document including a summary of the project technical findings and the extrapolation of these in relation to the market impact of the introduction of such technologies (e.g. vehicle parc reduction in selected emissions or fuel consumption). Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-04-03 |
Report on new prediction capabilities of regulatory and real driving emissionsWord file describing the correlation functions and relationships from particle source and formation to engine out raw emissions by means of experiments and 0/QD simulation models. Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-04-03 |
Report on optical diagnostics for fuel films and mixture inhomogeneities in endoscopically accessed engines. Focus in on implications for combustion strategies.Word file describing the optical measurements of fuel film and mixture inhomogeneities on the engine depending upon the combustion strategies. Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-04-03 |
Report on optical diagnostics for fuel films, mixture inhomogeneities, soot and water injection in optical engines. Focus is on implications for models for design and control.Word file summarizing the spectroscopic methods and results for engine mixture formation in single cylinder test engine. Description of in-cylinder processes for simulation validation. Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-02-13 |
Report on LES 3D CRFD development and knowledge transferWord file describing mixture formation, combustion and emission formation process by calibrated LES model for model and combustion system development. Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-02-13 |
Report on engine emissions predictions based on phenomenological combustion models.Word file describing the coupling of SI-SRM simulator from Loge with the 1D simulation software Amesim for calibrated mean value model derivation. Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-02-12 |
Project Website.Project Website Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Websites, patent fillings, videos etc. | 2020-02-12 |
Report on spray and spray/wall interaction model validation.Word file including the assessment of model quality allowing the prediction of mixture- and wall-film formation during development process. Programme: H2020-EU.3.4. - Topic(s): GV-02-2016 |
Documents, reports | 2020-02-12 |