Opendata, web and dolomites

SPINMULTIFILM project deliverables

The page lists 11 deliverables related to the research project "SPINMULTIFILM".

 List of Deliverables

SPINMULTIFILM: list of downloadable deliverables.
title and desprition type last update

Initial protocol on sol-gel synthesis of SFMO nanopowders

The SFMO compound in the form of nanosized powder, for a deposition of the single-layer films with dielectric shells, will be obtained by the modified sol-gel method.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-13

Report on mobility M12

A continuous monitoring of the mobility of the researchers will be performed in frames of this task. The individual summary reports after each mission will be collected. An annual report on mobility will be prepared.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-13

Report on testing of the synthesized magnetic materials

Control and optimization of materials properties, such as crystal lattice parameters and phase composition will be determined by the XRD, and magnetic properties will be defined by the magnetization measurements data.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-13

1st progress report

The 1st progress report will be elaborated and presented to the Commission at 12M.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-13

Initial protocol on targets preparation

Targets of the required geometry needed for a subsequent thin films deposition will be prepared by the pressing method with use of plasticizers.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-13

Report on structural and morphological characterization of the nanoheterostructures

Crystal structure, phase and element compositions of the “magnetic-dielectric” multilayer films will be controlled by XRD, ESCA, and EDX after each stage of the sequential sputtering, which will make it possible to optimize their formation processes. The films will be studied by SEM and TEM to obtain data on their thickness and cross-section structure

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-12

Report on mobility M24

A continuous monitoring of the mobility of the researchers will be performed in frames of this task. The individual summary reports after each mission will be collected. An annual report on mobility will be prepared.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-12

Report on magnetic, electrical and magnetoresistive properties of the nanoheterostructures

Temperature dependences of the magnetization in zero-field cooling (ZFC) and field-cooling (FC) modes in the temperature range 4.2–300 K and magnetic fields up to 12 T will be investigated. Investigations of the temperature dependences of electrical resistivity will enable the determination of the dominant electron scattering mechanisms in the presence of the dielectric barriers. The measurements of temperature and field dependences of magnetoresistance will allow to determine the nature of the magnetoresistive effect.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-12

Report on dielectric shell formation processes

The formation of single-layer films on the base of the SFMO sol-gel nanopowders with dielectric shells will be carried out by the single-step process.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-12

Initial protocol of multilayer nanoheterostructures formation

A solution of the WP tasks concerned with the formation of nanoheterostructures will be reported.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-12

Initial protocol of sol-gel nanopowder films deposition

A process of the creation of multilayer structures by sol-gel nanopowder films deposition will be developed.

Programme: H2020-EU.1.3.3. - Topic(s): MSCA-RISE-2017

download deliverable 

Documents, reports 2020-02-12