AIDA-2020 project deliverables
The page lists 62 deliverables related to the research project "AIDA-2020".
List of Deliverables
| title and desprition | type | last update |
|---|---|---|
Very compact calorimetersDevelopment of a flexible mechanical frame to be completed with thin precise absorber plates with a total depth of 30 radiation lengths, validation in beam tests. (Task 14.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-03-06 |
Charge readout and double phaseDevelopment of double-phase techniques for ionisation charges amplification and assessment of charge readout front-end cryogenic electronics. (Task 8.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-03-06 |
TCAD model radiation damageNew TCAD model to reproduce the macroscopic effects of radiation damage in the bulk and at the silicon-oxide interface. Comparison with experimental results on irradiated pixel sensors, comprehensive of those produced within Task 7.3. (Task 7.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-03-06 |
Advanced Tracking toolsImplementation of advance parallel track finding and fitting algorithms parallelization of aidaTT. (Task 3.6) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-03-06 |
Parallel versions of event processing frameworksValidation of parallelisation of algorithms and event processing. (Task 3.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-03-06 |
Silicon strip reference tracker at DESYConstruction, installation, commissioning and performance evaluation. (Task 15.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-03-06 |
New Frascati beam lineNew Frascati beam lines, after the re-design and the realization of the second line, are commissioned, including the new diagnostics and services and ready to be open to the users. (Task 15.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-03-06 |
Through Silicon Vias productionInterconnection of 65 nm CMOS readout chips (from wafers in D4.1) to silicon pixel sensors provided by WP6 and WP7. Backside connection of 65 nm CMOS chips by post-processing of Through Silicon Vias in wafers from D4.1. (Task 4.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-03-06 |
Common DAQ system used in combined beam testsThe DAQ system will be in use in common test-beam campaigns and the final description of the implementation and performance results will be presented in a report. (Tasks 5.1, 5.2, 5.3, 5.4, 5.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-03-06 |
Final pixel characterisationCompletion of the characterisation of irradiated thin 3D and planar sensors. Comparison of the performance for the two technologies as a function of fluence in controlled test-beam conditions. (Task 7.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-03-06 |
Sensor-design guidelinesRecommendations for sensor layouts optimised for radiation hardness, based on simulation results. (Task 6.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Optimised interconnection processBasic R&D with different adhesives, dispensing and curing methods on electrical test structures to achieve precise alignment, high and uniform capacitance and sufficient yield and reproducibility. Mechanical and electrical characterisation of the glued assemblies. (Task 6.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Data acquisition hardwareAs well as the TLU and software, the computing infrastructure, principally PCs, disks and networking, will be ready. (Tasks 5.2, 5.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Event Data Model toolkitCreation of EDM model in C++ with high performance I/O. (Task 3.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-02-25 |
Resistive anode manufacturingProtocols and tools for the large-size and large-scale production of resistive anodes for MICROMEGAS by an optimization process of the preliminary procedures and equipment used so far. (Task 13.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Large leak-less system, thermal modelConstruction of a real size water cooling circuit. Flexible thermal model of a compact calorimeters for reliable estimation of cooling needs. (Task 14.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Prototype of a large-size high-gain MPGDA large-size fully engineered and validated prototype of the a high-gain (> 10^5) MPGD; the detector architecture is based on THGEM technologies optimizing the choice of the substrate material. (Task 13.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
µ-channel prototypesµ-channel cooling devices in Si-Si and Si-Glass available to the partners for execution of the agreed test programme, including final model validation. Specifications, geometries and features previously agreed by the partners. (Task 9.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Data acquisition softwareA software, including EUDAQ interfaces, run control, data monitoring and slow control will be available for common detector test-beams. (Tasks 5.3, 5.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Advanced Particle Flow algorithmsDevelop novel advanced algorithms for calorimeter reconstruction at neutrino and collider experiments, implement these in the PandoraPFA framework. (Task 3.7) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-02-25 |
JSI TRIGA Reactor Transport systemThe transport system for large objects of a diameter of up to 12cm into the reactor irradiation position including the possibility for electrical and cooling connections to the samples has been installed and commissioned. (Task 15.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
CERN proton facility upgradeFacility management system, storage area, contactless fluence monitor and online database on irradiation facilities are operational at the CERN proton facility. (Task 15.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Production protocols of optimised RPC componentsSpecification of the protocols for production procedures, quality assessment and quality control in view of large-scale production. (Task 13.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Simulation active edge sensorsOptimised trench design and process for active edges in planar pixel sensors. Simulation of new planar pixel cells with finer pitches for the new 65 nm CMOS chips. (Task 7.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Purification and monitoringDefinition of common measurements methods for purity and validation of techniques for the control of liquid levels and thermodynamic conditions. (Task 8.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Implementation of DD4hep extensionsAdded alignment functionality and thread safety. (Task 3.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-02-25 |
Cold irradiations at BirminghamA cold box for irradiations between room temperature and -40 degrees C up to high proton fluences of the order of 10^17 p/cm^2 is installed in the Birmingham facility. The corresponding DAQ and temperature control systems are manageable via a user friendly GUI. (Task 15.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Station for tests on µ-channel test devicesFully engineered design of a test station available to partners, including detailed list of instruments and components, and manual of operation. One prototype test station built and in use for tests. (Task 9.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-02-25 |
Recommendation for industrialisationInvestigate options for hybridisation of large-area assemblies. Adapt the interconnection technology for larger surface areas and make it suitable for mass production with high yield. Investigate wafer-to-wafer bonding options. Select industrial partners for initial tests. (Task 6.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
CMOS 65 nm engineering runAvailability of the run with the “ATLAS/CMS†and CLICPIX pixel chips. (Task 4.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Updated readout systemAdaptation of readout system for operation in compact LC detectors implying optimisation of space and power consumption. Demonstration of concept with existing calorimeter prototypes and proposal of extrapolation to full size detector. (Task 14.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Alignment ToolkitGeneric toolkit with tight coupling to DD4hep allowing for the simulation of misalignment and extraction of alignment corrections. (Task 3.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-02-25 |
Electron beam welding demonstratorProduction of a multi-layer mechanical absorber prototype to demonstrate the applicability of this technique for advanced compact calorimeters. (Task 14.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Simulation of 3D pixel sensor cellsSimulation of new sensor cells for thin 3D sensors with fine pitch, reduced column diameter and inter-column distance. Simulation of charge collection properties of 3D sensors with thinner substrates and determination of optimal thickness for pixel detectors working at HL-LHC. (Task 7.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
CERN pixel beam telescope for the PSConstruction, installation, commissioning. (Task 15.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Advanced Assembly chain for Si calorimetersTools to assure a reproducible, well documented construction of a small series of calorimeter layers including technical documentation of process for fast transfer to mass production. Test benches for validation of individual components as e.g. Si Wafers. (Task 14.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Common test structuresIdentification of test structure designs which allow discriminating measurements of relevant structural performance parameter, prediction of performance by FEA, production of test structures and benchmarking results of these structures with the facility. (Task 9.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-02-25 |
GIF++ gas systemThe gas system has been equipped with additional distribution panels and mixers to allow for more parallel users. An IR analysis system has been installed. (Task 15.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Performance of test infrastructure for highly granular optical readoutDocumentation of the commissioning, performance and utilisation of the test systems for highly granular calorimeters with optical readout. (Task 14.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Implementation of extensions in USolidsExtended signature of classes, reviewed algorithms, well defined interfaces for Geant4, Root and Vector prototype. (Task 3.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-02-25 |
Optimisation of large-size precise space-resolution RPC structuresOptimisation of the gas gap structure (gap thickness, internal segmentation) by prototyping and testing at high-intensity facilities. (Task 13.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Advanced Mechanical facilityDefinition of facility requirements: Identification of parameters characterizing the performance of support structures and identification of experimental techniques which make these parameters accessible, prioritization of the need by the international community for these measurements at a central facility. (Task 9.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Magnetisation of large-scale cryogenic liquid detectorsEvaluation of magnetisation based on Superconducting Transmission Lines and High Temperature Superconducting lines. First tests of the novel magnetization schemes on iron using the MIND50 hardware available from the previous AIDA. (Task 8.6) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
LGAD simulationResults of LGAD simulation with choice of doping profile and position of the gain layer for pads and pixelated detectors. Identification of optimal dopant as alternative to boron for best radiation resistance. Choice of design between electron initiated or hole initiated avalanche. (Task 7.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Assemblies deliveredUse the sensors produced in Task 6.3 (Sensor development) to produce assemblies of sensors and readout ASICs for all participating projects. Mount assemblies on test boards provided by the participating projects. Make wire-bond connections between chips and PCBs. (Task 6.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Miniaturised HV power supplyPrototype of a MPGD-dedicated, remotely controlled, compact HV power supply; the control system includes the feed-back from environmental parameter sensors in order to implement on-line voltage compensation to obtain a stable gain. (Task 13.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Online event data modelDefinition of the online event data model, i.e. the concept of an event for detector systems having very different integration times, compatible with the offline software and in coordination with WP3. (Task 5.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Initial pixel characterisationCharacterisation of first 3D and planar pixel sensor test-structures on thin substrates, after hybridisation, with source measurements and analysis of beam test data. Feedback to the foundries for process optimisation in form of a report. (Task 7.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Large-size prototype of R-WGEMA large-size fully engineered and validated prototype of the Resistive-Well GEM, namely R-WGEM, a single multiplication stage MPGD produced by photolithographic technologies for large size and mass production able to stand high event rates. (Task 13.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
High-rate characterisation of large-size RPC prototypesQualification at high intensity beam lines of large-size prototypes of optimised RPCs optimised for the rate response and the fine time. (Task 13.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Trigger Logic Unit readyThe TLU hardware, including interface to CCC, will be ready, along with first versions of firmware and software for testing and integration with detector systems. (Task 5.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Environmental control system at DESYCentral environmental control and monitoring system at the DESY-II Test Beam Facility, which can be used by all user groups (hardware, software, user interfaces). (Task 15.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Common running of calorimeter prototypesData acquisition system to allow for a common data taking of different highly granular calorimeter prototypes in beam tests at CERN and DESY. These tests should provide data files containing events synchronised between the subsystems. (Task 14.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Validation of new resistive materials for RPCsValidation through the study of the rate and ageing properties of small RPC prototypes (single and multi-gap-detectors) exposed to intense sources/beams. (Task 13.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
BICMOS SiGe engineering runAvailability of run with SiPM calorimeter-WP14 and gas detectors-WP13 chips. (Task 4.3) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
Light readoutEvaluation of large area photo-detectors, assessment of wavelength-shifting techniques and digitisation techniques for the scintillation signals in noble liquids. (Task 8.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Geant4 based simulation toolkit DDG4Modular and flexible toolkit based on DD4hep and Geant4. (Task 3.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Other | 2020-02-25 |
Very high VoltageCharacterisation of phenomena related to high field in noble gases and liquids; study of construction techniques for cathodes, drift field cages and feedthroughs; VHV generation and transport techniques. (Task 8.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Interface definitionDefinition of interface standards for the common DAQ system which will describe how the detector DAQ system connects to the common DAQ. (Task 5.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Fibre test benchesDocumentation of the constructed and operational test facilities for scintillating and Cherenkov fibers, and a report on their utilisation and their performance. (Task 14.2) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Documents, reports | 2020-02-25 |
Radiation-hard facility instrumentation for the CERN proton facilitybeam profile monitor operational, box allowing to irradiate samples at -40 degrees C installed in the beam line and sample holders on radiation hard material produced and tested up to 10^17 p/cm^2. (Task 15.5) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |
MPGD gain map hole-by-holeLarge-size prototype of the system for hole-by-hole gain measurement with UV light, in correlation with defects identified through optical inspection, for THGEMs and GEMs. (Task 13.4) Programme: H2020-EU.1.4.1.2. - Topic(s): INFRAIA-1-2014-2015 |
Demonstrators, pilots, prototypes | 2020-02-25 |