DigiArt project deliverables
The page lists 27 deliverables related to the research project "DigiArt".
List of Deliverables
| title and desprition | type | last update |
|---|---|---|
AIV Test Plans & Integration ResultsReport on the integration protocol that will be established between the individual modules and the story telling engine, as well as on the integration tests that have been undertaken to verify the operational capacity of each module. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
Report on the Registration of Heterogeneous Types of Captured DataThis deliverable will report on the methods and tools that will be employed to successfully register the point clouds that will be generated in WP3, into a common reference system. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
Dissemination PlanDocument including a detailed version of the preliminary dissemination plans with concrete actions for the dissemination activities of each partner. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
Report on the Static and Aerial SensorsDeliverable reporting on the drone hover motion control/determination, as well as on the lab tests performed with the static sensor. The report will summarize our findings in statistically characterising the motion of the drones and investigating appropriate time-averaging techniques to reduce stand-off error caused by the static oscillation of the drone when hovering. It will also incorporate the pre-evaluation results of static sensor performed by the museum partners Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
Architecture and Interface DesignReport on the architecture that will be adopted for integrating all technologies under the joint cause of supporting the story telling engine. Mockups specifying the design and workflow of the final application will be also included, discussing how they manage to address the functional requirements reported in D2.2 Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
Technology Transfer RoadmapReport on the necessary steps for bringing DigiArt results into mainstream adoption, as well as reporting on the training sessions organized in T7.3 Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
Final Version of the Algorithms for 3D Semantics Extraction and Content InterlinkingThe initial implementation of the algorithms will be optimized towards the direction of becoming domain independent as well as learning efficient models from a few training samples and with minimum supervision. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Final WorkshopThe Project Legacy Workshop Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Other | 2019-09-17 |
Testing Protocol, Evaluation Results & Revised Requirement IThis deliverable will outline the methodology followed to conduct the evaluation tests and will report on the results. This deliverable will be updated in M36. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
Updated Dissemination PlanReport summarizing the project dissemination activities, assessing their impact and suggesting potential corrections to the adopted strategy. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
First WorkshopSensor Launch Workshop Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Other | 2019-09-17 |
First Version Demonstrators InstantiatedDemonstrators instantiated with the technologies and functional requirements determined during the first development cycle of the project. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Initial Version of the Algorithms for 3D Semantics Extraction and Content InterlinkingSoftware implementation and documentation of the algorithms that will be used for 3D semantics extraction and content interlinking. The specifications of these algorithms will be derived by the functional requirements and story plots defined in WP2. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Open Research Data pilotThis deliverable outlines the Data Management Plan (DMP) that will be employed during the H2020 project DigiArt. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Open Research Data Pilot | 2019-09-17 |
Final Version of the Story Telling EngineImproved version of the initial implementation encompassing the results of the second development cycle, as well as introducing optimizations with respect to the quality of the generated content and the compatibility with the virtual reality headsets. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Final Version of the Algorithms for the Creation of 3D ModelsThe initial software implementation will be optimized with the purpose to facilitate the creation of 3D models in large scales. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Second WorkshopDrones in Cultural Heritage Workshop Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Other | 2019-09-17 |
Testing Protocol, Evaluation Results & Revised Requirements IIThis deliverable will outline the methodology followed to conduct the final evaluation tests and will report on the results. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
First Version of the Aerial and Static Scanning SensorDelivery of the first prototype for the stabilized drones capable of high quality LIDAR and stereo-photogrammetry 3D data capture, together with the first-cycle infrastructure for the open source 3D scanning. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Final Version Demonstrators InstantiatedDemonstrators instantiated with the technologies and functional requirements determined during the second development cycle of the project. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Creativity Hotspots Through Tangible and Intangible InteractionAlgorithmic implementation and a prototype that will facilitate the interaction of the visitor with a 3D artefact and the creation of a personalized souvenir to take home. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Initial Version of the Algorithms for the Creation of 3D ModelsSoftware implementation and documentation of the algorithms that will be used for the creation of 3D models. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Final Version of the Aerial and Static SensorDelivery of the final prototypes for aerial and static sensor 3D scanning, together with the final evaluation reports on static sensor data capture and the data collected with drones. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |
Definition of Funcional Requirements & Story PlotsThe report will provide the functional requirements for the developed technologies and will also outline the story plots for the demonstrators. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
Project Communication KitInitial project publicity material consisting of the project web-site, poster, leaflet and factsheet, as well as the project’s social media accounts (i.e. Twitter, LinkedIn and Facebook). Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Other | 2019-09-17 |
Selection of Static Sensor Hardware & Release of SpecificationReport specifying the hardware platform that will be used to support the open source multi-technique 3D scanner. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Documents, reports | 2019-09-17 |
First Version of the Story Telling EngineSoftware implementation of the framework for composing stories in the 3D cultural worlds. This framework will encompass the results of 3D semantics extraction and content interlinking. Programme: H2020-EU.3.6.3. - Topic(s): REFLECTIVE-7-2014 |
Demonstrators, pilots, prototypes | 2019-09-17 |