The page lists 26 deliverables related to the research project "DRAGY".
title and desprition | type | last update |
---|---|---|
Report on the numerical study of plasma DBD actuators and on the numerical and experimental study of plasma DBD actuatorsReport on the numerical study of plasma DBD actuators and on the numerical and experimental study of plasma DBD actuators Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Joint document for guidelines and recommendation to industrial designers to raise TRL on drag reduction technologies.Joint document for guidelines and recommendation to industrial designers to raise TRL on drag reduction technologies. Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on computational implementation of low-viscosity-fluid injection in combination with synthetic-jet actuation and on experimental studies of own control techniques, subject to input from DLRReport on computational implementation of low-viscosity-fluid injection in combination with synthetic-jet actuation and on experimental studies of own control techniques, subject to input from DLR Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on experimental investigation of most promising technologies.Report on experimental investigation of most promising technologies. Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Synthetic Jet Actuation Measurement Data Flow field and skin friction measurement data and evaluation results for synthetic jet array flow actuation techniqueSynthetic Jet Actuation Measurement Data Flow field and skin friction measurement data and evaluation results for synthetic jet array flow actuation technique Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on analysis of experimental a range of unsteady-jet actuationReport on analysis of experimental a range of unsteady-jet actuation Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on the application of new turbulence models in engine applications, Report on device optimization using the new turbulence modelsReport on the application of new turbulence models in engine applications, Report on device optimization using the new turbulence models Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on validation of turbulence models for flow control: Comparison with experiments of WP2-3, Data analysis for turbulence models validation, Report on validation of turbulence models for flow control in engine applicationsReport on validation of turbulence models for flow control: Comparison with experiments of WP2-3, Data analysis for turbulence models validation, Report on validation of turbulence models for flow control in engine applications Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on the effectiveness of manipulating the outer structures using momentum and turbulence forcing in the outer layerReport on the effectiveness of manipulating the outer structures using momentum and turbulence forcing in the outer layer Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on optimization of operation of plasma actuators and on the experimental study of best technique implemented by a suitable spatial distribution of plasma DBD actuatorsReport on optimization of operation of plasma actuators and on the experimental study of best technique implemented by a suitable spatial distribution of plasma DBD actuators Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on DNS study of discretization effect of plasma actuators for experimental implementation of spanwise forcingReport on DNS study of discretization effect of plasma actuators for experimental implementation of spanwise forcing Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report with Conclusions derived from analysis of data for Re(t) = 1020 for two actuation periods, one optimal and the other sub-optimalReport with Conclusions derived from analysis of data for Re(t) = 1020 for two actuation periods, one optimal and the other sub-optimal Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report and measurement data of moving wall type flow actuation techniquesReport and measurement data of moving wall type flow actuation techniques Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on the numerical and experimental study of the tip and endwall deformations of turbomachinery blades and on the experimental study of grooves and ribletsReport on the numerical and experimental study of the tip and endwall deformations of turbomachinery blades and on the experimental study of grooves and riblets Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on industrial specification of flow control devicesReport on industrial specification of flow control devices Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on analysis on computation and experimental analysis and optimization.Report on analysis on computation and experimental analysis and optimization. Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on LES for spanwise-oscillating synthetic jets pair including the actuator cavity and on DNS of spanwise-oscillating synthetic jets inducing a travelling waveReport on LES for spanwise-oscillating synthetic jets pair including the actuator cavity and on DNS of spanwise-oscillating synthetic jets inducing a travelling wave Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on Numerical and experimental comparison of resultsReport on Numerical and experimental comparison of results Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report by POLIMI on the effect of the computational domain on the drag reduction by spanwise forcingReport by POLIMI on the effect of the computational domain on the drag reduction by spanwise forcing Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on the numerical study to assess performance of optimized sinuous riblets and of chevron riblets and on the numerical study to assess performance of undulated wallReport on the numerical study to assess performance of optimized sinuous riblets and of chevron riblets and on the numerical study to assess performance of undulated wall Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Development of new turbulence models for flow control drag reduction and on the performance of new turbulence models in practical flow control test cases of WP2-4Development of new turbulence models for flow control drag reduction and on the performance of new turbulence models in practical flow control test cases of WP2-4 Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on analysis of DNS and LES data without specific forcing of the outer structuresReport on analysis of DNS and LES data without specific forcing of the outer structures Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on preliminary conclusions derived from the analysis of a database at Re(t) = 500 for two actuation periods, one optimal and the other sub-optimalReport on preliminary conclusions derived from the analysis of a database at Re(t) = 500 for two actuation periods, one optimal and the other sub-optimal. Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on the effectiveness of adjoint methods for identifying the sensitivity of drag to outer-structure propertiesReport on the effectiveness of adjoint methods for identifying the sensitivity of drag to outer-structure properties Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Report on comparative study of four techniques (StTW and SpTW, wall-based and body-force-based) carried out within the CPI framework. Report with performance achieved with the best strategy previously identified in external turbulent boundary layer flowReport on comparative study of four techniques (StTW and SpTW, wall-based and body-force-based) carried out within the CPI framework. Report with performance achieved with the best strategy previously identified in external turbulent boundary layer flow. Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |
Final assessment of drag reduction technologies in industrial configurationsFinal assessment of drag reduction technologies in industrial configurations Programme: H2020-EU.3.4. - Topic(s): MG-1.10-2015 |
Documents, reports | 2020-03-25 |