#	Pagina
attuale pagina	/open-h2020/projects/211376/index.html

Opendata, web and dolomites

WTM-RECYCLE SIGNED

Large scale wind tunnel turboprop aircraft model integrating morphing devices for aerodynamic experimental assessment

Total Cost €

EC-Contrib. €

Partnership

Views

Outcomes and
results

WTM-RECYCLE project word cloud

Explore the words cloud of the WTM-RECYCLE project. It provides you a very rough idea of what is the project "WTM-RECYCLE" about.

2016 full cfd processed obvious lift length model re winglet jti le benefits groups te tests extrapolation reg roughly reflecting tested subcontracted morphing solutions responsibility kth losita wtm cfp04 total eurotech initial fuselage aerodynamic performed designed updates delivering first perform 05 ruag cs parts wt database manufacture 01 manufacturing competence post ibk geometry summarized itd cs2 straight data proven recycle display

Project "WTM-RECYCLE" data sheet

The following table provides information about the project.

Coordinator	KUNGLIGA TEKNISKA HOEGSKOLAN Organization address address: BRINELLVAGEN 8 city: STOCKHOLM postcode: 100 44 website: www.kth.se contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.
Coordinator Country	Sweden [SE]
Total cost	1˙534˙250 €
EC max contribution	1˙295˙875 € (84%)
Programme	1. H2020-EU.3.4.5.2. (IADP Regional Aircraft)
Code Call	H2020-CS2-CFP04-2016-02
Funding Scheme	CS2-IA
Starting year	2017
Duration (year-month-day)	from 2017-09-01 to 2020-09-30

Partnership

Take a look of project's partnership.

#	participants	country	role	EC contrib. [€]
1	KUNGLIGA TEKNISKA HOEGSKOLAN KUNGLIGA TEKNISKA HOEGSKOLAN Organization address address: BRINELLVAGEN 8 city: STOCKHOLM postcode: 100 44 website: www.kth.se contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	SE (STOCKHOLM)	coordinator	745˙500.00
2	EUROTECH DI MARIO AMOROSO SAS EUROTECH DI MARIO AMOROSO SAS Organization address address: Via Luigi Mercantini 23 IS 8 city: NAPOLI postcode: 80125 website: www.eurotechsas.it contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	IT (NAPOLI)	participant	301˙875.00
3	IBK-INNOVATION GMBH & CO. KG IBK-INNOVATION GMBH & CO. KG Organization address address: BUTENDEICHSWEG 2 city: HAMBURG postcode: 21129 website: www.ibk-innovation.de contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	DE (HAMBURG)	participant	248˙500.00

Map

Project objective

WTM-RECYCLE addresses the call JTI-CS2-2016-CFP04-REG-01-05 and will in total re-design an existing WT-model (designed and manufacturing in the JTI-CS-project LOSITA), manufacture the new parts and implement them in into the model and finally perform a WT-tests focused on delivering aerodynamic data. The results will be post-processed and implemented into an aerodynamic database supported by CFD.

The model updates to be performed focus on changes that can be roughly summarized in two groups:

a.) At first model updates reflecting a new design state are implemented (e.g. fuselage geometry, fuselage length).

b.) Solutions developed within the REG-ITD which shall be tested and assessed in the WT. This specifically involves the morphing LE, TE and winglet, which shall be used as High-Lift devices.

The project addressing this task is organized straight-forward using a consortium of three partners that have proven their competence in WT-model design, aerodynamic analysis and assessment as well as manufacturing in recent R&D projects. WT-test activities are subcontracted to the RUAG-WT, which is the obvious choice for test including this model. In total the project strongly benefits from the experience with the initial model of two of the partners (IBK and EUROTECH) obtained in the LOSITA-project, since they will also support the WTM-RECYCLE project.

Finally an aerodynamic assessment and an extrapolation towards full-scale will be performed under the responsibility of KTH in order to display the benefits of the new High-Lift-devices.

Deliverables

List of deliverables.
Dissemination Plan	Documents, reports	2020-02-27 11:42:14

Take a look to the deliverables list in detail: detailed list of WTM-RECYCLE deliverables.

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "WTM-RECYCLE" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "WTM-RECYCLE" are provided by the European Opendata Portal: CORDIS opendata.