MEET project deliverables
The page lists 11 deliverables related to the research project "MEET".
List of Deliverables
| title and desprition | type | last update |
|---|---|---|
Technical workshop summaryThe technical workshop summary will provide a critical analysis on the global technical performance of the project. This workshop will be used to disseminate information on the project, its methodology and findings, promote the results, and to solicit feedback and recommendations from relevant stakeholders. Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Other | 2020-04-02 |
Project websiteUsing the logo, a website will be established for describing the project including information on the project partners. A private area for sharing confidential project documents, results and reports will be established. The website will be continuously updated. Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Websites, patent fillings, videos etc. | 2020-04-02 |
Newsletters M18A newsletter will be produced at regular intervals that includes all the relevant information from the Commission and partners Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Websites, patent fillings, videos etc. | 2020-04-02 |
Open Access Decision Support Tool for Optimal Usage of Geothermal EnergyDecision-making framework and support tool for analysis and quantification of the influencing factors regarding investment and revenue in EGS for obtaining economic assessment indicators of EGS projects. Tool will consider specific site features, different possible technical configurations and will determine the optimal EGS technology configuration and operation for a specific site. This deliverable is crucial for project as a whole and more specifically to following deliverables: D4.5, D7.2, D7.3 and D7.4. Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Documents, reports | 2020-04-02 |
Newsletters M3A newsletter will be produced at regular intervals that includes all the relevant information from the Commission and partners. Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Websites, patent fillings, videos etc. | 2020-04-02 |
Data Management PlanData Management Plan addressing the following points: which data is stored, FAIR data, and data security (updated M24, M42) Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Open Research Data Pilot | 2020-04-02 |
Summary of additional heat production capacities at the Soultz sous Forêts siteA report compiling the thermal field results obtained on the Soultz plant in term of produced additional heat. These thermal results are very relevant for geothermal industry and thus with the project. The gap between the observed additional heat produced during the tests, and the planned heat will be a mean for measuring the success factor. Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Documents, reports | 2020-04-02 |
ORC user’s manual including installation procedureDescription of ORC operating procedures Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Documents, reports | 2020-04-02 |
Review and selection of outcrop-analogues of the four Variscan reservoir types in regard to sample collectionBased on literature research, own mapping data and field campaigns, we will present a selection of outcrops most representative for the four Variscian reservoir types to (a) allow sample collections for laboratory tests and (b) to characterize the petrological and tectonic setting in terms of geothermal reservoir potential. This basic work is relevant for D5.2, D5.5 to D5.9. There is no risk of failure to find adequate outcrops, it is just an issue on the quality level of the outcrops. Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Documents, reports | 2020-04-02 |
1D/2D and dual porosity/DFN models of borehole fractures and hydraulic circulation simulationsThis deliverable aims at providing and testing the influence of permeability structures of various scale on the actual productivity, injectivity of a borehole. It will help to assess whether faults are acting as conduits or barriers to flow and will help to quantify the influence of the fracture network and the matrix porosity/permeability to the flow rate. It serves as a basis for the larger scale 3D models of D 3.3 and D 3.9. Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Documents, reports | 2020-04-02 |
Mapping of potential end-usersThe objective of this phase is to find users for the heat resource close to our production sites. We will achieve this by using our local network (mayors,etc…) and also by engaging with industrial and agricultural networks at regional and national levels in order to find new business willing to start an activity with cheap an sustainable heat. Success criteria: input to UNIZG-FER’s decision-making support tool. Programme: H2020-EU.3.3.2. - Topic(s): LCE-18-2017 |
Documents, reports | 2020-04-02 |