INSITER project deliverables
The page lists 22 deliverables related to the research project "INSITER".
List of Deliverables
| title and desprition | type | last update |
|---|---|---|
Field validation report and recommendationsThis is a result from task T5.2, which comprises the documentation and reports on the field validation. The report will show the final performance of the buildings and the positive impact of self-inspection addressing the following aspects: building physics analysis (e.g. U-value, sound insulation ); reliability of structure; preferred materials and their assembly demands; and indoor climate. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Recommendations for standardisationThis is a result from task T6.1. Reflection will be made on existing guidelines and standards to extend the preliminary list. Targeted standardisation areas –including building engineering and energy, quality management, ICT and BIM, as well as procurement. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Integrated field demonstration reportIncluding set-up and results of demonstration activities involving stakeholders at real cases. This is a combined deliverable of the original D5.5 and D5.6. The content and coverage remain the same. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Training modules and pilot training coursesThis is a result from task T6.1, which also includes a Learning Content Management System. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Cross-case analysis and benchmarkingThis deliverable also describes the industry’s views on practicality and affordability of INSITER tools and methods. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Measuring and diagnosis solutions for inspecting building componentsThis is a result from task T1.2, and it presents practical techniques using hardware and software tools for self-inspection of building components. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Measuring and diagnosis solutions for inspecting MEP/HVAC componentsThis is a result from task T1.3, and it presents the practical measurement protocols supported by hardware and software tools for self-inspection of MEP/HVAC components. It presents practical techniques (protocols) supported by hardware and software for self-inspection in all phases of a building project. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Guidelines for self-inspection in new constructionThis is a result from task T1.1, and it presents INSITER Methodology for new buildings. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Dissemination and exploitation plansThis is a result from task T6.3. The outlined and intended content are described in DoA addressing dissemination and exploitation intentions. The first version of the plans (public) will be delivered in M3, but they will continuously be updated until the project completion in M48. The final exploitation plan related to the business plan will be confidential (CO). Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
BIM-based self-instruction models for mobile devicesThis is a result from task T4.2, which will be developed in conjunction with the training modules in WP6/T6.1 –self-instructions for improvement of worker’ knowledge and skills. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Guidelines for self-inspection in refurbishmentThis is a result from task T1.1, and it presents INSITER Methodology for existing buildings. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Lab test protocols and set-upThis is a result from task T5.1, which will serve as guidelines to carry out the lab test activities and analysis of the findings. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Other | 2019-09-02 |
Calculation and analytical methods for MEP/HVAC componentsThis is a result from task T1.3, and it describes conceptual measurement protocols and quantitative method for self-inspection of MEP/HVAC components. It focuses on self-inspection of critical MEP/HVAC components that affect quality and energy performance in all phases of a building project. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Framework for BIM, hardware and software data inter-operabilityThis is a result from task T4.2, which address data inter-operability between different types of hardware instruments for measurement (incl. their firmware / middleware), software tools, and BIM. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Other | 2019-09-02 |
Functional requirements and integration architecture of applications for process, planning and costThis is a result from task T3.1, which will serve as the underpinning for further software development addressing planning and cost management. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Other | 2019-09-02 |
Best practices and existing shortcomingsThis is a result from task T1.1, and it critically reviews the state-of-the-art procedures, and describes innovative ways for self-inspection, quality assurance and energy-performance check. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Functional requirements and integration architecture of applications for building quality and energy assessmentsThis is a result from task T3.2, which will serve as the underpinning for further software development addressing building quality and energy performance. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Other | 2019-09-02 |
Case study elaboration, field validation protocols, and equipment calibrationThis is a result from task T5.2, which contains the description of the use cases for the purpose of field validation of the prototype INSITER Systems and Methodology. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Public and consortium websitesThis is a result from task T6.2. The websites will be delivered and full-operational in M3. and they will be updated until the project completion in M48. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Websites, patent fillings, videos etc. | 2019-09-02 |
Calculation and analytical methods for building componentsThis is a result from task T1.2, and it focuses on self-inspection of critical building components that affect quality and energy-performance. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |
Communication materials and public relationsThis is a result from task T6.2. The types of dissemination items are described in the DoA as part of the preliminary dissemination plan. The first materials (e.g. leaflets, templates) will be available starting from M3, but the work will continue as new dissemination materials will be delivered and updated until the project completion in M48. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Websites, patent fillings, videos etc. | 2019-09-02 |
Lab test report and recommendationsThis is a result from task T5.1, which will conclude the lab an virtual tests, and present recommendations for improvement and validation of the prototype INSITER Systems and Methodology. Programme: H2020-EU.2.1.5.2. - Topic(s): EeB-03-2014 |
Documents, reports | 2019-09-02 |