Riblet4Wind project deliverables
The page lists 12 deliverables related to the research project "Riblet4Wind".
List of Deliverables
| title and desprition | type | last update |
|---|---|---|
Final Dissemination and Exploitation plan and achieved D&E resultsThis report describes the final Dissemination and Exploitation plan as well as the achieved D&E results. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Documents, reports | 2020-01-20 |
Expected impact on performanceThis report outlines the expected impact of the riblet-coated rotor-blades on their performance in terms of power generation. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Documents, reports | 2020-01-20 |
Test of application technique on mock-upThis report describes the test results of the application technique on the mock-up. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Documents, reports | 2020-01-20 |
Performance investigation completedThis report describes the results of the performance investigation on the prototypic rotor blades equipped with the riblet stractures. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Documents, reports | 2020-01-20 |
Coated rotor blades and basic process design for the coating processThis deliverable comprises prototypes of coated rotor blades as well as the basic design for the coating process. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Demonstrators, pilots, prototypes | 2020-01-20 |
Application mould material definedThe material for the embossing mould has been defined based on the requirements in terms of material properties and compatibility with the coating as developed in WP4. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Documents, reports | 2020-01-20 |
Coated rotor blades mountedThe coated rotor blades have been successfully mounted to the selected wind turbine. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Demonstrators, pilots, prototypes | 2020-01-20 |
Selection of technology in a benchmark by performance evaluationThis report summarises the findings of the performance evaluation of the two technology sreams and the concluding selection of the technology for up-scaling and field testing. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Documents, reports | 2020-01-20 |
Disposable slot dieThis deliverable is a demonstrator of the disposable slot die for the riblet applicator. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Demonstrators, pilots, prototypes | 2020-01-20 |
Lacquer material for application trials and rotorblade coating availableThis deliverable comprises the optmised coating material for application on the rotor blades Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Demonstrators, pilots, prototypes | 2020-01-20 |
Preliminary Dissemination and Exploitation planThis report outlines the preliminary plan for dissemination and exploitation activities envisaged by the individual project beneficiaries. Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Documents, reports | 2020-01-20 |
Final report on requirementsThis report desribes the final requirements for Programme: H2020-EU.3.3.2.4.;H2020-EU.3.3.2.2.;H2020-EU.3.3.2.1. - Topic(s): LCE-03-2014 |
Documents, reports | 2020-01-20 |