microMole project deliverables
The page lists 28 deliverables related to the research project "microMole".
List of Deliverables
| title and desprition | type | last update |
|---|---|---|
Prototype of the Agent core and MMS with basic functionalityThe prototype in this deliverable will present the results of the first implementation phase (tasks T6.1 and T6.2). In concrete, it will contain the Data Communication, Security Enforcement and System Management functions in the MMS and the ring device controllers (M18). Responsible: WUT (8 PM), BTEC (21 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Other | 2019-11-22 |
Prototype of the crawler robot and toolThe second version of the crawler robot would be a raw fully functioning prototype ready for testing. This prototype is based on the work carried out in T7.2. Responsible: JGK (5 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Heat-sink realization conceptThis report gathers results from T5.8. In concrete, it will contain: a) Technical drawing describing the integration of the TEG into the ring structure, and b) Thermal material parameters. Responsible: FhG-IZM-ERE (4 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Cooling structure designThis report results from T5.9. It will contain: a) Recommendation of optimized cooling structure and material, and b) Thermal resistance parameters for interfaces. Responsible: FhG-IZM-ERE (4 PM). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Implementation specification of the chemical sensors, the sensing subsystem and the ASICDeliverable D3.1 is a report about the sensing subsystem, and will contain preliminary results from T3.1.1 and the specification required for the implementation of the ASIC as described in T3.2. Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Microfluidic passive system description and evaluationResults from T4.3 and T4.6.1. Responsible: UCBL (12 PM), CS (0.5 PM). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Revised prototype of the Agent core and MMS with basic functionalityThe prototype in this deliverable will present the results of the third implementation phase (tasks T6.5 and T6.6). In concrete, it will contain the Final specification, implementation and performance analysis of the Remote Control Subsystem in the MMS and ring device controllers (M36). Responsible: WUT (8 PM), BTEC (21 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Other | 2019-11-22 |
Technical and legal evaluation of the revised prototypes with improved sensing subsystemThe D4.9 will correspond to the technical and legal evaluation of the revised prototypes with improved sensing subsystem developed in WP4. This deliverable will include the results from T4.8 and T4.9. Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Full sensing subsystem with interface for external testingDeliverable D3.3 is a prototype of the sensing subsystem. The prototype will be based on a first version of a measurement ASIC (resulting from T3.2) and of chemical sensors (T3.1.1). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Prototype of the first version of the complete energy management subsystemThis deliverable includes a functional prototype of the first version of the step-up DC-DC converter (T5.1) with its MPP algorithm (T5.2) together with a functional prototype of T5.4 and the energy storage element found in T5.3. The deliverable includes also an evaluation report with the results obtained in the laboratory tests (T5.5). Responsible: FhG-IIS-LOS (10 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
ASIC and the electrodes for internal testingThis prototype comes after the work on Task 3.4. This prototype will be used for preliminary integration in WP6 and WP8, and validation of the specified interface. Responsible: CS (1 PM), FhG (5 PM), UGENT (31 PM), UCBL (0,5 PM). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Improved electrodesDeliverable D3.7 comprises the design and optimization of the sensor electrodes towards the final selected target compounds. This deliverable is in direct continuation of D2.5, D3.2 and D3.3, where the outcome of several important deliverables converge. The results of the compound stability tests will determine the final selection of compounds which should be detected (D2.5). A better knowledge of the sewage constitution will identify potential challenges for the sensor operation and allow to modify and improve the sensor surface. The prototype of the ASIC and the electrodes will be evaluated internally (D3.2) and the full sensing subsystem will be tested externally (D3.3). The results of these tests are a first and important evaluation of the integrated sensing system prototype and will provide insight into the working of the sensing system as a whole. This information will be used to improve or change the sensor electrodes and thus adapt the multi-array towards the final sensing system. The robustness of the electro-chemical sensors towards ATS specific compounds in waste water will be evaluated and, if needed, improved. Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Revised prototypes of the first sensing and sample storage unitsResults from T4.7. Responsible: UCBL (11PM), CS (4PM), WUT (2PM). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Prototype of the re-design of the complete energy management subsystemFunctional prototype of the second version of the complete energy management subsystem (T5.7) including a second version of the ASIC that contains the step-up DC-DC converter (T5.6). It includes a datasheet of the step-up DC-DC converter as well as a datasheet of the energy management printed circuit board. Responsible: FhG-IIS-LOS (5 PM). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Prototype of the Agent core and MMS with full functionalityThe prototype in this deliverable will present the results on the second implementation phase (tasks T6.3 and T6.4). In concrete, it will contain the Data Acquisition and Data Distribution functions in the MMS and the ring device controllers (M27). Responsible: WUT (9 PM), BTEC (21 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Other | 2019-11-22 |
Sensing Unit - Technical and Legal evaluationResults from T4.6.2. Responsible CFLP (2PM), BKA (1 PM), TiU (0.5PM), CS (0.5PM) UCBL (2PM). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Evaluation report of the revised energy-harvesterD5.4 will summarize the resulting performance characteristics of the thermoelectric energy harvesting chain developed within work package 5. This includes the description of the prevalent mission profiles of thermal sinks and sources in the application environment of sewage water pipelines and the effects on the generated electric outputs. For this purpose, the parameterized model of the thermal path (T5.10) is applied. The report delivered provides a technological specification of the demonstrator for the dedicated use case of the project. Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Sensing Unit - First PrototypeResults from T4.4. Responsible: UCBL (3 PM), CS (1 PM). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Transducers for active fluidic systemResults from T4.2.1 to T4.2.2. Responsible: CS and UCBL Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Heat-sink prototypeThis deliverable results from T5.6. In addition to the prototype, a report will be delivered containing: a) Verified values for the achievable temperature gradients across the TEG under the considered mission profiles, b) Definition of designated use-cases for thermoelectric energy harvesting in sewage pipes. Responsible: FhG-IZM-ERE (4 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Sampling Unit - Technical and Legal evaluationResults from T4.5 and T4.6.3. Responsible: CFLP (1 PM), UCBL (9 PM) WUT (4PM). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Revised sensing subsystemDeliverable D3.5 is a prototype of the sensing subsystem. The prototype will be based on an improved version of a measurement ASIC (result from T3.3. and T3.5) and of chemical sensors (T3.1.2). Improved specifications for the chemical sensors and the ASIC are derived from the evaluation report D3.4. The prototype is dedicated for the integration of the sensing subsystem into the mole ring. Further prototypes of the sensing subsystem are provided which can be used by CFLP and BKA for chemical analysis of chemical substances under lab conditions. Responsible: CS (1 PM), FhG (5 PM), UGENT (12 PM), UCBL (0,5 PM). Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Demonstrators, pilots, prototypes | 2019-11-22 |
Website of the projectWebsite of the project with basic information about the project and public deliverables Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Websites, patent fillings, videos etc. | 2019-11-22 |
Design of the microfluidic structureResults from T4.1. Responsible: CS (1,5 PM), UCBL (4 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Design of the transducersResults from T4.2. Responsible: CS (5 PM), UCBL (3 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
Design of the crawler robot and toolDesign of the crawler robot and tool (based on outcomes of T7.2). The first version of the robot would be a CAD Computer-Aided Design. Responsible: JGK (4 PM) Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |
PatentsReport showing the list of patents submitted or approved during the execution of the project and related to the project\'s outputs from every consortium partner, if the partner agrees. Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Websites, patent fillings, videos etc. | 2019-11-22 |
Scientific publicationsA minimum of 3 peer-reviewed scientific articles will be published during the course of the project.These articles will be published either in a pure Open Access Journal, as an openly accessible article in a hybrid journal or in a conference where we are able to fulfill the EC requirements. The conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS) publishes its proceedings in the Journal of Micromechanics and Microengineering that is a hybrid open access journal. Moreover, some of the article of the EUROSENSORS Conference are published in the Sensors and Actuators A and B journals that also has a publication fee to provide open access. Programme: H2020-EU.3.7. - Topic(s): FCT-05-2014 |
Documents, reports | 2019-11-22 |