WEEVIL project deliverables
The page lists 15 deliverables related to the research project "WEEVIL".
List of Deliverables
| title and desprition | type | last update |
|---|---|---|
Report on validation of electric drive test-bench resultsThe deliverable will show the results of the electric drive system tests carried out on a test-bench. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Vehicle validation reportAt the end of the project prototype vehicle will be subjected to various tests in order to measure and validate the Chassis and Vehicle Dynamics, Vehicle NVH, Energy Consumption and Performance of the Vehicle. Automotive tests will be executed to fully demonstrate the outcome of the project. Findings will be published as a detailed report. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Report on design themes and stylistic proposals for vehicle exterior and cockpit elementsSummary/description of the different proposals for vehicle exterior and cockpit elements. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Description of project websiteDocument describing use/operation of the project website, including both the internal (for project partners) and external (for the general public) parts. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Electric drive specificationsThe deliverable will provide the specifications defined in Task 4.1, which compile the desired performance and requirements for the electric drive system, specifically for the electrical machine and the cooling system, consisting of: Driving maps and desired torque-speed curve in the wheel; Geometrical dimensions of the available space for the electric machine; Thermal conditions: surrounding temperature and temperature limit, required IP protection, etc.; Characteristics of electrical batteries: electrical ratings and power delivery on charge/discharge; Torque-speed curve of motor (according to desired wheel torque-speed); Electric machine’s duty cycles for cooling system design (based on driving maps). Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Report on commercial parametersCompetitor analysis (identification of the target audience, customer expectations and derises, referring sales markets, commercial parameters); definition of buyers\' profiles; definition of brand values and competitive advantages. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Report on the validation of the connection system designThe design concept of the mechanical fixing and electrical connection will be delivered. This will include technical drawings with mechanical specification, electrical specification and a list of components. The connection system has to be defined and approved by other partners involved in the development of the chassis. Feasibility will be checked also with the support of manufacturers. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Vehicle specificationsVehicle concept research based on chassis and engine features given by overall concept; essential characteristics of the vehicle. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Communication and Dissemination PlanDocument providing details on how outputs/results of each WP and deliverables will be disseminated during and after the finalization of the project. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Technical data of the composites for the structural optimisationPhysical properties (density, fibre and void content) as well as mechanical ones (stiffness, strength, impact properties) will be reported. This technical data will be employed in the simulation models for the Vehicle Structure and Chassis Design (Task 3.1). Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Report on the validation of the energy packs including test reportThe prototypes of the battery packs will be operated on a demonstrator that can perform discharge-charge cycles and shows communication protocol behavior. The energy packs will be tested and validated on a demonstrator test bench, and they will be ready to start testing on vehicle. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Report on the validation of the communication interface including code library and test tools including test reportA technical specification document will be delivered, that will describe the communication physical interface with minimum requirements and the application protocol. An implementation of the communication protocol will be available on the target architecture chosen for the BMS, tested according to specifications and with the support of simulation tools. The software test and simulation tools to validate the implementations of the communication protocol will be also delivered. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Report on the results of the virtual analysesThe final design of the vehicle chassis and structure will be analyzed for crash safety, NVH, dynamic drive conditions, load conditions, durability and weight reduction possibilities. The report will validate the final virtual design of the vehicle chassis and structure. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Summary of the performed safety analysis during the projectThe report will include the analysis of the structure and chassis in terms of the safety of passengers. The main purpose is to improve the passive safety of electric 3-wheeler in order to reduce the number of fatalities and the severity of the injuries. In this case is particularly important to pay attention to the selection of the mounting structure seat and safety belt anchorages. Several add-ons will be proposed to decrease the fatality in crashes with other vehicles. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |
Vehicle homologation and certification reportDescription of test reports and the homologation process for the final vehicle, including fulfilment of EC regulations requirements and reporting on EC certificate for road use. Programme: H2020-EU.3.4. - Topic(s): GV-5-2014 |
Documents, reports | 2020-01-24 |