Opendata, web and dolomites

FLEDGED SIGNED

FLExible Dimethyl ether production from biomass Gasification with sorption-enhancED processes

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "FLEDGED" data sheet

The following table provides information about the project.

Coordinator
POLITECNICO DI MILANO 

Organization address
address: PIAZZA LEONARDO DA VINCI 32
city: MILANO
postcode: 20133
website: www.polimi.it

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Italy [IT]
 Project website http://www.fledged.eu/
 Total cost 5˙569˙330 €
 EC max contribution 5˙306˙455 € (95%)
 Programme 1. H2020-EU.3.3.3. (Alternative fuels and mobile energy sources)
 Code Call H2020-LCE-2016-RES-CCS-RIA
 Funding Scheme RIA
 Starting year 2016
 Duration (year-month-day) from 2016-11-01   to  2020-10-31

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    POLITECNICO DI MILANO IT (MILANO) coordinator 757˙125.00
2    AGENCIA ESTATAL CONSEJO SUPERIOR DEINVESTIGACIONES CIENTIFICAS ES (MADRID) participant 889˙452.00
3    UNIVERSITAET STUTTGART DE (STUTTGART) participant 814˙295.00
4    NEDERLANDSE ORGANISATIE VOOR TOEGEPAST NATUURWETENSCHAPPELIJK ONDERZOEK TNO NL (DEN HAAG) participant 797˙840.00
5    STICHTING ENERGIEONDERZOEK CENTRUM NEDERLAND NL (PETTEN) participant 628˙785.00
6    LAPPEENRANNAN-LAHDEN TEKNILLINEN YLIOPISTO LUT FI (LAPPEENRANTA) participant 454˙456.00
7    INSTITUT NATIONAL DE L ENVIRONNEMENT ET DES RISQUES INERIS FR (VERNEUIL EN HALATTE) participant 359˙437.00
8    FRAMES RENEWABLE ENERGY SOLUTIONS B.V. NL (ALPHEN AAN DEN RIJN) participant 311˙875.00
9    SUMITOMO SHI FW ENERGIA OY FI (ESPOO) participant 219˙437.00
10    ECONWARD TECH, S.L. ES (MADRID) participant 73˙750.00
11    QUANTIS CH (ECUBLENS VD) participant 0.00

Map

 Project objective

The FLEDGED project will deliver a process for Bio-based dimethyl Ether (DME) production from biomass. The FLEDGED project will combine a flexible sorption enhanced gasification (SEG) process and a novel sorption enhanced DME synthesis (SEDMES) process to produce DME from biomass with an efficient and low cost process.

The primary aim of FLEDGED project is to develop a highly intensified and flexible process for DME production from biomass and validate it in industrially relevant environments. This objective will be accomplished by: - Experimental validation of the flexible SEG process at TRL5; - Experimental validation of the flexible SEDMES process at TRL5; - Evaluation of the full biofuel production chain from energy, environmental, economic, socio-economic and risk point of view; - Preparation of the ground for future exploitation of the results of the project beyond FLEDGED, by including in the consortium industrial partners along the whole biofuel production chain.

By combining the SEG and the SEDMES processes, the FLEDGED project will validate a plant concept that: - is characterized by a tremendous process intensification: sorption of CO2 in the gasifier and of water in the DME reactor allows designing an overall process for DME production with only two fundamental steps and with reduced units for syngas conditioning - allows operating with a wide range of biomass feedstocks - will be more efficient than competitive processes and expected to have a lower cost, thanks to the reduced number of components, the avoidance or significant reduction of recycles and the avoidance of energy consuming and costly air separation and CO2 separation units - is capable of producing syngas with tailored composition by adapting the SEG process parameters, which allows coupling with an electrolysis system for converting excess intermittent renewable electricity into a high value liquid fuel

 Deliverables

List of deliverables.
Results of the sorption enhanced gasification in CSIC and USTUTT lab-scale testing Documents, reports 2019-11-08 11:12:46
FLEDGED web site and social media Websites, patent fillings, videos etc. 2019-05-24 17:14:24
Experimental matrix for SEG and SEDMES tests Documents, reports 2019-05-24 17:21:35
Characterisation of raw materials for sorption enhanced gasification Documents, reports 2019-05-24 17:14:31
Preliminary process simulations Documents, reports 2019-08-01 12:57:06
Goal and scope of the Sustainability and Process Safety analysis Documents, reports 2019-05-27 12:45:02
Synthesis, characterization and catalytic performance of HPA and Al2O3 catalysts for methanol dehydration Documents, reports 2019-08-01 12:57:22
Catalytic performance of novel catalyst mixtures for the direct synthesis of DME Documents, reports 2019-08-01 12:57:15
Synthesis, characterization and catalytic performance of Cu/ZnO/Al2O3 and MnOx/Co3O4 for the methanol synthesis Documents, reports 2019-08-01 12:56:41
Updated experimental matrix for SEG and SEDMES tests Documents, reports 2019-08-01 12:57:10

Take a look to the deliverables list in detail:  detailed list of FLEDGED deliverables.

 Publications

year authors and title journal last update
List of publications.
2017 Selina Hafner, Nina Armbrust, Reinhold Spörl, Günter Scheffknecht
PRODUCTION OF TAILORED SYNGAS FOR DIMETHYL ETHER SYNTHESIS BY SORPTION ENHANCED GASIFICATION
published pages: , ISSN: , DOI:
Proceedings of the 12th International Conference on Fluidized Bed Technology 2019-10-16
2017 Kari Myöhänen, Juha Palonen, Timo Hyppänen
MODELLING OF INDIRECT STEAM GASIFICATION IN CIRCULATING FLUIDIZED BED REACTORS
published pages: , ISSN: , DOI:
Proceedings of the 12th International Conference on Fluidized Bed Technology 2019-10-16
2019 Isabel Martínez, Giulio Guandalini, Selina Hafner, Reinhold Spörl, Matteo Romano
Sorption Enhanced Gasification (SEG) of Biomass with CO2 Capture for the Production of Synthetic Natural Gas (SNG) and DME for Transport Sector with Negative Emissions
published pages: , ISSN: , DOI:
Proceedings of the 14th Greenhouse Gas Control Technologies Conference 2019-10-16
2018 Cristina Peinado, Dalia Liuzzi, Rosa M. Ladera, M. Retuerto, Miguel. A. Peña, Sergio Rojas
Effect of the support on the performance of heteropolyacid catalysts for DME production from methanol
published pages: , ISSN: , DOI:
Proceedings of the 4th International Symposium on the Catalysis for Clean Energy and Sustainable Chemistry 2019-10-16
2018 Simone Guffanti, Carlo Giorgio Visconti, Gianpiero Groppi
THE EFFECTS OF INTRAPARTICLE DIFFUSION PHENOMENA ON DIMETHYL ETHER DIRECT SYNTHESIS
published pages: , ISSN: , DOI:
Proceedings of the XXIII International Conference on Chemical Reactors 2019-10-16
2017 Simone Guffanti, Carlo Giorgio Visconti, Gianpiero Groppi
Sorption enhanced dimethyl ether synthesis: process analysis and reactor modelling
published pages: , ISSN: , DOI:
Proceedings of the 25th International Conference on Chemical Reaction Engineering 2019-10-16
2019 C. Peinado, D. Liuzzi, M. Retuerto, M. A. Peña, J. L. G. Fierro, S. Rojas
Effect of copper loading and CO2/CO ratio for the production of methanol over Cu/ZnO/Al2O3 catalysts from biomass-derived syngas
published pages: , ISSN: , DOI:
Proceedings of the 5th International Symposium on Green Chemistry 2019-10-16
2018 Cristina Elsido, Giulio Guandalini, Matteo C. Romano, Emanuele Martelli
Preliminary Simulation Study and Heat Integration of a Highly Intensified and Flexible Process for Bio-DME and Electricity Production
published pages: , ISSN: , DOI:
Proceedings of the 13th Conference on sustainable development of energy, water and environment systems 2019-10-16
2017 Jurriaan Boon, F.P.F. van Berkel, H.A.J. van Dijk, J.F. Vente
Separation Enhanced Dimethyl Ether Synthesis
published pages: , ISSN: , DOI:
Proceedings of the 5th International Conference on Tailor-Made Fuels from Biomass 2019-10-16
2018 I. Martínez, V. Kulakova, G. Grasa, R. Murillo
Experimental investigation on sorption enhanced gasification (SEG) of biomass in a fluidized bed reactor for producing a tailored syngas
published pages: , ISSN: , DOI:
Proceedings of the 12th European Conference on Fuel and Energy Research and its Applications 2019-10-16
2019 C. Peinado, D. Liuzzi, M. Retuerto, Rosa M. Ladera, M. Peña, J. L. G. Fierro, S. Rojas
Heteropolyacid based catalysts for the production of dimethyl ether from methanol. Effects of reaction pressure and nature of the support
published pages: , ISSN: , DOI:
Proceedings of the 5th International Symposium on Green Chemistry 2019-10-16
2017 Guy MARLAIR, Anitha MURALIDHARA, Thangavelu JAYABALAN, Karine ADAM, Christophe LEN
Promoting safety in innovative and sustainable biomass value chains
published pages: , ISSN: , DOI:
Proceedings of the 4th International Symposium on Green Chemistry 2019-10-16
2018 Jurriaan Boon
The Sorbent and the Process: CO2 and H2O Sorption Enhancement in Chemical Reactors
published pages: , ISSN: , DOI:
Proceedings of the XXIII International Conference on Chemical Reactors 2019-10-16
2019 Jasper van Kampen, Jurriaan Boon, Frans van Berkel, Jaap Vente, Martin van Sint Annaland
Steam separation enhanced reactions: Review and outlook
published pages: 1286-1303, ISSN: 1385-8947, DOI: 10.1016/j.cej.2019.06.031
Chemical Engineering Journal 374 2019-09-05
2019 Jurriaan Boon, Jasper van Kampen, Roelof Hoogendoorn, Stefania Tanase, Frans P.F. van Berkel, Martin van Sint Annaland
Reversible deactivation of γ-alumina by steam in the gas-phase dehydration of methanol to dimethyl ether
published pages: 22-27, ISSN: 1566-7367, DOI: 10.1016/j.catcom.2018.10.008
Catalysis Communications 119 2019-09-05

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "FLEDGED" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "FLEDGED" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.3.3.3.)

REDIFUEL (2018)

Robust and Efficient processes and technologies for Drop In renewable FUELs for road transport

Read More  

Pulp and Fuel (2018)

Pulp and Paper Industry Wastes to Fuel

Read More  

CLARA (2018)

Chemical Looping gAsification foR sustainAble production of biofuels

Read More