Explore the words cloud of the REG GAM 2018 project. It provides you a very rough idea of what is the project "REG GAM 2018" about.
The following table provides information about the project.
Coordinator |
LEONARDO - SOCIETA PER AZIONI
Organization address contact info |
Coordinator Country | Italy [IT] |
Total cost | 67˙289˙236˙754 € |
EC max contribution | 50˙224˙604 € (0%) |
Programme |
1. H2020-EU.3.4.5.2. (IADP Regional Aircraft) |
Code Call | H2020-IBA-CS2-GAMS-2017 |
Funding Scheme | CS2-IA |
Starting year | 2018 |
Duration (year-month-day) | from 2018-01-01 to 2019-12-31 |
Take a look of project's partnership.
An aircraft that can transport between approximately 100-130 passengers, and is intended for short and medium haul flights can be considered to be a Regional Aircraft. The challenge is to improve the passenger experience so that regional aircraft offer a comparable level of inflight comfort, free from noise and vibration, with a comfort level comparable or better than today’s modern jets and with a reliability of service well beyond today’s service into small and regional airports.
Summary Report on Assessment of aero new devices against WTT results (Linked to 2019-D_3.5.1-01) | Documents, reports | 2020-04-03 12:45:33 |
REG IADP Dissemination and Exploitation Management Plan (Linked to D_0.5-02) | Documents, reports | 2020-03-19 12:54:53 |
REG IADP risks management plan (Linked to D_0.3-02) | Documents, reports | 2020-03-19 12:54:53 |
DMP for Scientific Paper with underlined data shown in it | Documents, reports | 2020-03-11 14:44:37 |
Coordination Memo on completion of drawings release for CDR of Full-scale Morphing Winglet Ground Demonstrator (Linked to 2018-D_2.1.2-22) | Documents, reports | 2020-02-13 12:45:37 |
Summary Report of WL/WT PDR (Linked to 2018-D_2.4.2-01) | Documents, reports | 2020-02-13 12:45:38 |
Coordination Memo abourt release of Technical documentation supporting CDR (Linked to 2018-D_3.5.3-01) | Documents, reports | 2020-02-13 12:45:37 |
\"Coordination Memo \"\"Innovative configuration, engine dataset -- loop 2\"\" (Linked to 2018-D_1.1.2-03)\" | Documents, reports | 2020-02-13 12:45:37 |
Coordination Memo about release of Technical documentation supporting CDR for Central Wingbox (Linked to 2018-D_3.5.1-03) | Documents, reports | 2020-02-13 12:45:38 |
Coordination Memo: OWB F/S, R/S and Ribs Drawings release (Linked to 2018-D_3.1.3-01) | Documents, reports | 2020-02-13 12:45:38 |
Coordination Memo about release of Technical documentation supporting CDR of Centre Wing Assembly (MTP) (Linked to 2018-D_3.5.4-03) | Documents, reports | 2020-02-13 12:45:37 |
Synthesis of Air Vehicle Technologies first assessment at A/C level (Linked to 2018-D_2.1.4-19) | Documents, reports | 2020-02-13 12:45:37 |
Summary Report on Predictive geometries for the Assembly of FTB2 (Linked to 2018-D_3.5.4-01) | Documents, reports | 2020-02-13 12:45:37 |
On-Board Systems Progress Status Report 2018 (Linked to 2018-D_2.3-04) | Documents, reports | 2020-02-13 12:45:37 |
Coordination Memo on completion of drawings release for CDR of Full-scale Innovative Wing Tip Ground Demonstrator (Linked to 2018-D_2.1.2-24) | Documents, reports | 2020-02-13 12:45:38 |
Final Winglet/Wingtip EMA Specification Summary | Documents, reports | 2020-02-13 12:45:38 |
Summary Report of IVHM framework description (Linked to 2018-D_2.2.3-07) | Documents, reports | 2020-02-13 12:45:38 |
\"Coordination Memo \"\"E-LGS Final Design\"\" (Linked to 2018-D_2.3.2-12)\" | Documents, reports | 2020-02-13 12:45:37 |
Summary Report of Safety assesment (rear engine mounting installation) -- Loop 2 (Linked to 2018-D_1.1.1-48) | Documents, reports | 2020-02-13 12:45:37 |
Coordination Memo: OWB Stiffened Panels drawings release (Linked to 2018-D_3.1.3-02) | Documents, reports | 2020-02-13 12:45:37 |
Summary report on FCS EMA Interface Control, Performance and Design Document for WL/WT (Linked to 2018-D_2.4.2-17) | Documents, reports | 2020-02-13 12:45:37 |
Progress report on energy saving evaluations about innovative process to replace hard chrome surface treatments (Linked to 2018-D_4.2-01) | Documents, reports | 2020-02-13 12:45:37 |
Dissemination and Exploitation Management Plan (Updating) (Linked to 2018-D_0.5-01) | Documents, reports | 2020-02-13 12:45:37 |
Summary Report of Innovative configuration performance assesment - Loop 2 (Linked to 2018-D_1.1.1-43) (Linked to 2018-D_1.1.1-43) | Documents, reports | 2020-02-13 12:45:37 |
Take a look to the deliverables list in detail: detailed list of REG GAM 2018 deliverables.
year | authors and title | journal | last update |
---|---|---|---|
2015 |
FNM VEL Understanding of structural and acoustic behaviour of stiffened composite panels for fuselage applications FNM VEL published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
CIRA Brussels - Clean Sky General Forum - CS - Airframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
CESA Design, development and manufacturing of an electro-mechanical actuator and test rig for AiRcrafts Main LandIng Gear AcTuation systems ARMLIGhT project CESA Spain published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
Trinity College Dublin Full-scale Wind Tunnel Demonstration of Nose Landing Gear Low-Noise Technologies for Future Regional Aircraft “ALLEGRA†project Trinity College Dublin published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
Proff.
B. Mele,
R. Tognaccini (UNINA) Modelling drag reduction devices by slip length at high Reynolds number published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
PLM CS - Structural design of high lift and load control and alleviation devices for a natural laminar flow wing ASAM project PLM published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
F. Toffol
F. Fonte
Prof S Ricci
(POLIMI) Design of aeroelastic wingtip devices for wing load alleviation published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
\"Università di Napoli \"\"Federico II\"\", Politecnico di Torino\" Future Green Regional A/C Transonic Laminar Wing experimental assessment Through innovative WT tests Drag passive reduction by riblets technology: Results from GRA ITD studies and prospects for further achievements Università di Napoli, Politecnico di Torino published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
Thales Avionics, ATR ATR : Green FMS functions for a green Aircraft published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2019 |
S.de Lucas “Surrogate Models in flap design of Clean Sky 2†published pages: , ISSN: , DOI: |
EUROGEN 2019 Portugal Bi-yearly | 2020-03-05 |
2019 |
Andrea De Martin, Giovanni Jacazio, Massimo Sorli Design of a PHM system for electro-mechanical flight controls: a roadmap from preliminary analyses to iron-bird validation published pages: 4018, ISSN: 2261-236X, DOI: 10.1051/matecconf/201930404018 |
MATEC Web of Conferences 304 | 2020-03-05 |
2015 |
CIRA, INCAS, FOI, Chalmers University of technology, ONERA Airframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA, Italy, INCAS, Romania, FOI, Chalmers University of technology, Sweden and ONERA, France published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
PoliTO, FNM VEL Politecnico di Torino, Italy - 23rd Conference of the Italian Association of Aeronautics and Astronautics LOAD CONTROL AND ALLEVIATION TECHNOLOGY FOR APPLICATION TO FUTURE GREEN REGIONAL AIRCRAFT Politecnico di Torino published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
FNM VEL Structural Health Monitoring of a composite stiffened panel FNM VEL published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2017 |
G. Amendola,
I. Dimino,
A. Concilio,
G. Andreutti
(CIRA)
R. Pecora,
M. Lo Cascio
(UNINA) Conceptual Design of a Morphing Wingle published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
Prof. G. Jacazio The ASTIB project published pages: , ISSN: , DOI: |
2020-03-05 | |
2016 |
Sylvie Dequand Green regional aircraft gust response published pages: , ISSN: , DOI: |
Greener Aviation COnference 2016 | 2020-03-05 |
2015 |
cira CS - Airframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA published pages: , ISSN: , DOI: |
2020-03-05 | |
2019 |
G.Pozzuto, A. De Martin, G.Pispola, M. Palmieri, F.Gallorini Electrical Flight Control for load control and alleviation system published pages: , ISSN: , DOI: |
MEA2019 Conferences | 2020-03-05 |
2019 |
Antonio Carlo Bertolino, Massimo Sorli, Giovanni Jacazio, Stefano Mauro Lumped parameters modelling of the EMAs’ ball screw drive with special consideration to ball/grooves interactions to support model-based health monitoring published pages: 188-210, ISSN: 0094-114X, DOI: 10.1016/j.mechmachtheory.2019.03.022 |
Mechanism and Machine Theory 137 | 2020-03-05 |
2015 |
PoliTO ICAS - 29th Congress of the International Council of the Aeronautical Sciences ADAPTIVE CONTROLLER DESIGN FOR GUST LOAD ALLEVIATION Politecnico di Torino published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2017 |
L Sanders, D-C Mincu, PL Vitagliano, M Minervino, J Kennedy, G Bennett Prediction of the acoustic shielding by aircraft empennage for contra-rotating open rotors published pages: 626-648, ISSN: 1475-472X, DOI: 10.1177/1475472x17734334 |
International Journal of Aeroacoustics 16/7-8 | 2020-03-05 |
2015 |
Politecnico di Milano Future Green Regional A/C Gust Load Alleviation control system experimental validation through innovative WT tests GLAMOUR project Politecnico di Milano published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
Fraunhofer Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Smart Droop Nose for application to Laminar Wing of future Green Regional A/C Fraunhofer published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
Trinity College Dublin, Pininfarina S.p.A. Italy, Teknosud S.R.L Italy, Univ.Polit. delle Marche Italy, Paragon SA Greece, Eurotech, Italy, FNM VEL Manchester, UK 10th AIAA/CEAS Aeroacoustics Conference, No. AIAA-2004-2955, Manchester, UK, 2004. WENEMOR: Wind Tunnel Tests for the Evaluation of the Installation Effects of Noise Emissions of an Open Rotor Advanced Regional Aircraft published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
FNM VEL Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Load Control and Alleviation Technology for application to future Green Regional Aircr aft FNM VEL published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2017 |
M. Chiatto,
L. de Luca
(CIRA) Numerical and Experimental Frequency Response of Plasma Synthetic Jet Actuator published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
FNM VEL Innovative Electrical Energy Management strategy for Future Regional All-Electric Aircraft FNM VEL published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
IBK \"\"\"Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT testsETRIOLLA project IBK \"\"\" published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
ONERA, FNM VEL, CIRA Natural Laminar Flow Transonic Wing Design applied to Future Innovative Green Regional Aircraft published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
Piaggio Aerospace, FNM VEL Aerodynamic Design Based on Numerical Optimization of a Green ATF Regional Aircraft Piaggio Aerospace, FNM VEL published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
CIRA Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Aiframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
University of Bristol Optimization of Morphing Wings for Improved Environmental Performance MAWS project University of Bristol published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2015 |
IBK CS - ETRIOLLA Actuation and measurement technologies for WTT of the innovative regional transonic wing ETRIOLLA project IBK Innovation GmbH published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
M.Di Gifico V.Vaccaro
(LDO VEL) Improving Aeroelastic model accuracy and affordability by exploiting wind tunnel test results published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
EDISOFT-EMPRESA DE SERVICOS E DESENVOLVIMENTO DE SOFTWARE SA CS - ADAVES advanced avionics equipment simulation ADAVES project published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
Seconda Università degli studi di Napoli An Electrical POwer Center for Aeronautical Loads “EPOCAL†project Seconda Università degli Studi di Napoli published pages: , ISSN: , DOI: |
2020-03-05 | |
2016 |
Ignazio Dimino Preliminary Design and performance of a morphing winglet for green regional A/C published pages: , ISSN: , DOI: |
Greener Aviation COnference 2016 | 2020-03-05 |
2019 |
M.Rodriguez \"“Inclusion of structure and loads objectives in the definition of probability for Flight Control System failures in the frame of FTB#2 Cleansky2â€\" published pages: , ISSN: , DOI: |
EuCASS 2019 Spain Bi-yearly | 2020-03-05 |
2015 |
Fraunhofer London - Droop Nose Technology toward Future Green Regional Aircraft: Development and Prototype Demonstration Fraunhofer published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
Proff.
B. Mele,
R. Tognaccini (UNINA) Slip length based boundary condition for modeling drag reduction devices published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
,F. Amoroso
F. Rea,
M. Arena,
M. C. Noviello
R. Pecora,
(UNINA)
I. Dimino
(CIRA) Experimental shape reconstruction of a morphing wing trailing edge in simulated operative condition published pages: , ISSN: , DOI: |
2020-03-05 | |
2016 |
Maxime Forte Research activities of ONERA on laminar wings in the framework of the JTI CLean Sky: transition prediction published pages: , ISSN: , DOI: |
Greener Aviation COnference 2016 | 2020-03-05 |
2015 |
Fraunhofer Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Design, Development and Test of Synthetic Jets Actuators for Future Green Regional Aircraft Fraunhofer published pages: , ISSN: , DOI: |
2014 | 2020-03-05 |
2017 |
M. Chiatto,
L. de Luca
(CIRA) Investigation of a Plasma Synthetic Jet Actuator for Flow Control. published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
P. Catalano,
D. de Rosa
(CIRA)
Proff.
B. Mele,
R. Tognaccini,
(UNINA)
F. Moens
(ONERA) Influence of Riblets and Laminar Flow Control on the Performance of a Regional Aircraft Configuration published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
CEIT \"\"\"CS - Design Considerations of an Autonomous Wireless Sensor Network for Structural Health Monitoring in AircraftWILDCRAFT project CEIT \"\"\" published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
I. Dimino,
G. Amendola,
A. Concilio,
G. Andreutti
(UNINA)
G. Pispola,
F. Perni
(UMBRA) Preliminary Design of the Actuation Mechanism of a Morphing Winglet for Green Regional A/C published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
M. Chiatto,
L. de Luca
(CIRA) Performance characteristics of plasma synthetic jets actuator published pages: , ISSN: , DOI: |
2020-03-05 | |
2017 |
Reyes M.
Climen H
Karpel M
(CASA) Increased Order Aeroservoelastic Modeling in Practice published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
Elisa Capello,* Giorgio Guglieri, and Fulvia Quagliotti Comprehensive Robust Adaptive Controller for Gust Load Alleviation published pages: , ISSN: 1537-744X, DOI: |
THE SCIENTIFIC WORLD JOURNAL 2014 | 2020-03-05 |
2015 |
FNM VEL Composite Platform SHM design from flight and ground demonstration requirements published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
Fraunhofer Optical fibres and piezoelectric technologies applications in flight and ground demonstrations. Fraunhofer published pages: , ISSN: , DOI: |
2020-03-05 | |
2015 |
OMI \"\"\"CS - Composite Fuselage One Piece Barrel (OPB): Integrated Development and Prototype DemonstrationAFLOG project OMI\"\"\" published pages: , ISSN: , DOI: |
2020-03-05 | |
2018 |
Nicolosi F., Corcione S., Trifari V., Cusati V., Ruocco M., Vecchia P.D. Performance evaluation and DOC estimation of an innovative turboprop configuration published pages: , ISSN: , DOI: |
2018 Aviation Technology, Integration, and Operations Conference, AIAA 2018-3662, 19 p. | 2020-02-13 |
2018 |
Chiatto M., Palumbo A., De Luca, L Piezo-driven and Plasma Synthetic Jet Actuators. A comparative investigation published pages: , ISSN: , DOI: |
2020-02-13 | |
2018 |
Matteo Chiatto, Francesco Capuano, Luigi de Luca Numerical and experimental characterization of a double-orifice synthetic jet actuator published pages: 2883-2896, ISSN: 0025-6455, DOI: 10.1007/s11012-018-0866-7 |
Meccanica 53/11-12 | 2020-02-13 |
2018 |
V. Memmolo, Y.J. Park, M. Lilov, E. Monaco, F. Ricci Preliminary acousto-ultrasonic investigation for multi-parameter transducer self-diagnostic system in composites published pages: 1229-1238, ISSN: 0263-8223, DOI: 10.1016/j.compstruct.2018.05.125 |
Composite Structures 202 | 2020-02-13 |
2018 |
Andrea Palumbo, Matteo Chiatto, Luigi de Luca Measurements versus Numerical Simulations for Slotted Synthetic Jet Actuator published pages: 59, ISSN: 2076-0825, DOI: 10.3390/act7030059 |
Actuators 7/3 | 2020-02-13 |
2019 |
Maurizio Arena, Francesco Amoroso, Rosario Pecora, Salvatore Ameduri Electro-Actuation System Strategy for a Morphing Flap published pages: 1, ISSN: 2226-4310, DOI: 10.3390/aerospace6010001 |
Aerospace 6/1 | 2020-02-13 |
2018 |
M. Fioriti*, N. Viola*, D. Ferretto*, V. Vercella* and S. Cresto Aleina*
*Department of Mechanical and Aerospace Engineering - Politecnico di Torino
F. Nicolosi†and V. Cusatiâ€
†Department of Industrial Engineering – Aerospace division University of Naples Federico
II PARAMETRIC APPROACH TO OPERATING COSTSESTIMATION FOR AN INNOVATIVE REGIONALAIRCRAFT published pages: , ISSN: , DOI: |
2020-02-13 | |
2017 |
Gianluca Amendola, Ignazio Dimino, Antonio Concilio, Giovanni Andreutti, Rosario Pecora, Marco Lo Cascio Preliminary Design Process for an Adaptive Winglet published pages: 83-92, ISSN: 2278-0149, DOI: 10.18178/ijmerr.7.1.83-92 |
International Journal of Mechanical Engineering and Robotics Research 6/6 | 2020-02-13 |
2018 |
Benedetto Mele, Renato Tognaccini Slip Length–Based Boundary Condition for Modeling Drag Reduction Devices published pages: 3478-3490, ISSN: 0001-1452, DOI: 10.2514/1.j056589 |
AIAA Journal 56/9 | 2020-02-13 |
2018 |
Maurizio Arena, Francesco Amoroso, Rosario Pecora, Gianluca Amendola, Ignazio Dimino, Antonio Concilio Numerical and experimental validation of a full scale servo-actuated morphing aileron model published pages: 105034, ISSN: 0964-1726, DOI: 10.1088/1361-665x/aad7d9 |
Smart Materials and Structures 27/10 | 2020-02-13 |
2018 |
Haohua Zong, Matteo Chiatto, Marios Kotsonis, Luigi de Luca Plasma Synthetic Jet Actuators for Active Flow Control published pages: 77, ISSN: 2076-0825, DOI: 10.3390/act7040077 |
Actuators 7/4 | 2020-02-13 |
2019 |
Maurizio Arena, Rita Palumbo, Rosario Pecora, Francesco Amoroso, Gianluca Amendola, Ignazio Dimino Flutter Clearance Investigation of Camber-Morphing Aileron Tailored for a Regional Aircraft published pages: 4018146, ISSN: 0893-1321, DOI: 10.1061/(asce)as.1943-5525.0000973 |
Journal of Aerospace Engineering 32/2 | 2020-02-13 |
2018 |
L. Maio, F. Ricci, V. Memmolo, E. Monaco, N.D. Boffa Application of laser Doppler vibrometry for ultrasonic velocity assessment in a composite panel with defect published pages: 1030-1039, ISSN: 0263-8223, DOI: 10.1016/j.compstruct.2017.10.059 |
Composite Structures 184 | 2020-02-13 |
2018 |
Fabrizio Nicolosi*, Salvatore Corcione*, Pierluigi Della Vecchia*, Vittorio Trifari*,
Manuela Ruocco*,
*University of Naples Federico II, Department of Industrial Engineering, Aerospace
Division AERODYNAMIC DESIGN AND ANALYSIS OF ANINNOVATIVE REGIONAL TURBOPROPCONFIGURATION published pages: , ISSN: , DOI: |
2020-02-13 | |
2018 |
V. Memmolo, E. Monaco, N.D. Boffa, L. Maio, F. Ricci Guided wave propagation and scattering for structural health monitoring of stiffened composites published pages: 568-580, ISSN: 0263-8223, DOI: 10.1016/j.compstruct.2017.09.067 |
Composite Structures 184 | 2020-02-13 |
2019 |
Maurizio Arena, Antonio Concilio, Rosario Pecora Aero-servo-elastic design of a morphing wing trailing edge system for enhanced cruise performance published pages: 215-235, ISSN: 1270-9638, DOI: 10.1016/j.ast.2019.01.020 |
Aerospace Science and Technology 86 | 2020-02-13 |
2018 |
L. L. Kang∗ , J. Z. Wu∗ , L. Russo†, R. Tognaccini†The relation between vorticity-based and thermodynamic-based drag breakdown published pages: , ISSN: , DOI: |
2020-02-13 | |
2019 |
Noviello M.C., Rea F., Arena M., Pecora R., Amoroso F. Description of Position Control Laws forFunctionality Test of a Bi-modal Morphing Flap published pages: , ISSN: 2278-0149, DOI: 10.18178/ijmerr.8.1.31-40 |
International Journal of Mechanical Engineering and Robotics Research | 2020-02-13 |
2018 |
Francesco Rea, Francesco Amoroso, Rosario Pecora, Frederic Moens Exploitation of a Multifunctional Twistable Wing Trailing-Edge for Performance Improvement of a Turboprop 90-Seats Regional Aircraft published pages: 122, ISSN: 2226-4310, DOI: 10.3390/aerospace5040122 |
Aerospace 5/4 | 2020-02-13 |
2018 |
Matteo Chiatto, Andrea Palumbo, Luigi de Luca A Calibrated Lumped Element Model for the Prediction of PSJ Actuator Efficiency Performance published pages: 10, ISSN: 2076-0825, DOI: 10.3390/act7010010 |
Actuators 7/1 | 2020-02-13 |
Are you the coordinator (or a participant) of this project? Plaese send me more information about the "REG GAM 2018" project.
For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.
Send me an email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.
Thanks. And then put a link of this page into your project's website.
The information about "REG GAM 2018" are provided by the European Opendata Portal: CORDIS opendata.