Opendata, web and dolomites
AMaTUC
Boosting the scientific excellence and innovation capacity in additive manufacturing of the Technical University of Cluj-Napoca
Total Cost €
0EC-Contrib. €
0Partnership
0Views
0AMaTUC project word cloud
Explore the words cloud of the AMaTUC project. It provides you a very rough idea of what is the project "AMaTUC" about.
innovation
smart
additive
below
quality
presented
implementing
capacity
personalised
lbu
romania
computer
strengthen
sciences
am
simulation
romanian
excellence
amatuc
cae
tucn
acuas
university
fem
consultants
integrate
suitable
intelligentsia
loughborough
manufacturing
planning
markets
industry
base
benefit
boost
profile
sub
tooling
takes
rapid
automotive
technologies
competitive
twinning
level
cluj
specialisation
aachen
priorities
scientific
swot
fh
national
strategy
napoca
Project "AMaTUC" data sheet
The following table provides information about the project.
| Coordinator |
UNIVERSITATEA TEHNICA CLUJ-NAPOCA
Organization address contact info |
| Coordinator Country | Romania [RO] |
| Project website | http://www.amatuc.com |
| Total cost | 999˙443 € |
| EC max contribution | 999˙443 € (100%) |
| Programme |
1. H2020-EU.4.b. (Twinning of research institutions) |
| Code Call | H2020-TWINN-2015 |
| Funding Scheme | CSA |
| Starting year | 2016 |
| Duration (year-month-day) | from 2016-01-01 to 2018-12-31 |
Partnership
Take a look of project's partnership.
| # | ||||
|---|---|---|---|---|
| 1 | UNIVERSITATEA TEHNICA CLUJ-NAPOCA | RO (CLUJ NAPOCA) | coordinator | 501˙495.00 |
| 2 | LOUGHBOROUGH UNIVERSITY | UK (LOUGHBOROUGH) | participant | 206˙161.00 |
| 3 | FACHHOCHSCHULE AACHEN | DE (AACHEN) | participant | 194˙050.00 |
| 4 | INTELLIGENTSIA CONSULTANTS SARL | LU (BERTRANGE) | participant | 97˙737.00 |
Map
Project objective
The overall aim of the AMaTUC project is to boost the scientific excellence and innovation capacity in additive manufacturing of the Technical University of Cluj-Napoca (TUCN) and its high-quality Twinning partners for the benefit of the automotive industry and personalised products markets. To achieve this aim, the 3 year project will build upon the existing strong research and innovation base of TUCN and its twinning partners Loughborough University (LbU), FH Aachen University of Applied Sciences (ACUAS) and Intelligentsia Consultants (Intelligentsia). The AMaTUC project aims to boost TUCN and twinning partners' scientific excellence and innovation capacity in additive manufacturing, as well as implementing a research and innovation strategy focused on three sub-topics: 1. Improve existing AM technologies, 2. Integrate the AM technologies with suitable Rapid Tooling methods, and 3. Design for competitive manufacturing of personalised products and computer planning (CAE-FEM) analysis and simulation The research and innovation strategy takes into account the recent SWOT analysis of TUCN as well as the national Romanian research priorities and Smart Specialisation Strategy. The specific objectives of the AMaTUC project are presented below: • Objective 1: Strengthen TUCN’s research excellence in AM • Objective 2: Enhance the research and innovation capacity of TUCN and Twinning partners • Objective 3: Raise the research profile of TUCN and the Twinning Partners • Objective 4: Contribute to the research and innovation priorities of Romania • Objective 5: Support research and innovation on a European level
Deliverables
| Project Newsletters - Period 1 | Websites, patent fillings, videos etc. | 2019-11-06 11:25:19 |
| One page statement that Task 4.3 has been completed | Documents, reports | 2019-11-06 11:25:19 |
| Project website | Websites, patent fillings, videos etc. | 2019-11-06 11:25:19 |
| Promotion guide about TUCN | Websites, patent fillings, videos etc. | 2019-11-06 11:25:19 |
| Project leaflet and poster | Websites, patent fillings, videos etc. | 2019-11-06 11:25:19 |
| Project Newsletters -Period 2 | Websites, patent fillings, videos etc. | 2019-11-06 11:25:18 |
Take a look to the deliverables list in detail: detailed list of AMaTUC deliverables.
Publications
| year | authors and title | journal | last update |
|---|---|---|---|
| 2017 |
Cosma, N. Balc, M. Moldovan, L. Morovic, P. Gogola, C. Borzan Post-processing of customized implants made by laser beam melting from pure Titanium published pages: 738-747, ISSN: 1454-4164, DOI: |
Journal of Optoelectronics and Advanced Materials Vol. 19, No. 11-12 | 2019-11-06 |
| 2018 |
Borzan, Cristina Stefana Miron; Moldovan, Marioara; Bocanet, Vlad Evaluation of Surface Modification of PA 2200 Parts Made by Selective Laser Sintering Process published pages: 886-889, ISSN: 0034-7752, DOI: |
REVISTA DE CHIMIE 69, 4 | 2019-11-06 |
| 2017 |
Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings published pages: 3008, ISSN: 2261-236X, DOI: 10.1051/matecconf/20179403008 |
MATEC Web of Conferences 94 | 2019-11-06 |
| 2016 |
Lazar, M.-A., Rotaru, H., Prodan, D, Roman, C.R., Câmpian, R.S. Bere P Evaluation of the morphology and structure of e glass fiber-reinforced composites for cranio-facial bone reconstruction published pages: 249-260, ISSN: 1224-7154, DOI: |
Studia Universitatis Babes-Bolyai Chemia 61/2 | 2019-11-06 |
| 2016 |
Abdul Kudus, SI, Campbell, RI, Bibb, R Assessing The Value Of 3D Printed Personalised Products published pages: , ISSN: , DOI: |
MCP-CE | 2019-11-06 |
| 2017 |
Răzvan Păcurar, Ancuţa Păcurar, Nicolae Bâlc Research on the mechanical behaviour of an airplane component made by selective laser melting technology published pages: 3012, ISSN: 2261-236X, DOI: 10.1051/matecconf/20179403012 |
MATEC Web of Conferences 94 | 2019-11-06 |
| 2017 |
Domniţa Frăţilă, Horaţiu Rotaru Additive manufacturing – a sustainable manufacturing route published pages: 3004, ISSN: 2261-236X, DOI: 10.1051/matecconf/20179403004 |
MATEC Web of Conferences 94 | 2019-11-06 |
| 2015 |
Domnita Fratila Numerical and Experimental Approach of Cutting Temperatures to Green Turning of 42CrMo4 Steel published pages: 657-666, ISSN: 1042-6914, DOI: 10.1080/10426914.2015.1004708 |
Materials and Manufacturing Processes 31/5 | 2019-11-06 |
| 2016 |
Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas Basic Research on Lattice Structures Focused on the Strut Shape and Welding Beads published pages: 833-838, ISSN: 1875-3892, DOI: 10.1016/j.phpro.2016.08.086 |
Physics Procedia 83 | 2019-11-06 |
| 2018 |
Sorin Dumitru Grozav, Vasile Adrian Ceclan, Gabriel Nicodim Ciusca Calculation of the contact surface in the orbital deformation of the cylindrical workpiece published pages: 695-700, ISSN: 1221-5872, DOI: |
Acta Technica Napocensis, Series: Applied mathematics, mechanics and engineering vol 61 no 4 | 2019-11-06 |
| 2017 |
Mircea A. Rusu, Dan Leordean, Cosmin Cosma, Miuta Filip, Marioara Moldovan, Laura Silaghi-Dumitrescu, Olga Hilda Orasan Characterization polyethylene terephthalate nanocomposites mixing with nano-silica and titanium oxide published pages: 8005, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713708005 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2018 |
H.F. Chicinaş, T.F. Marinca, B.V. Neamțu, G. Conțiu, O. Isnard, I. Chicinaş Influence of process control agent type on the mechanosynthesis of Fe 3 O 4 particles published pages: 1838-1847, ISSN: 0921-8831, DOI: 10.1016/j.apt.2018.04.020 |
Advanced Powder Technology 29/8 | 2019-11-06 |
| 2017 |
Nicolae Bâlc, Cristian Vilău Design for Additive Manufacturing, to produce assembled products, by SLS published pages: 4002, ISSN: 2261-236X, DOI: 10.1051/matecconf/201712104002 |
MATEC Web of Conferences 121 | 2019-11-06 |
| 2018 |
Becze S., Vuscan I., Jiang B., Panc N. Evaluation of the turbocharger center housing flange influence onvibration measurements published pages: 114-119, ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering Volume 16, Issue 2 | 2019-11-06 |
| 2016 |
Miron Borzan C. S., Dudescu M.C., Ceclan V., Trif A., Ridzon M., Berce P., PA 2200 vs. PMMA: Comparison Between the Mechanical Proprieties Obtained for the 2 Biocompatible Materials published pages: 1-5, ISSN: 0025-5289, DOI: |
MATERIALE PLASTICE Vol. 53, no. 1 | 2019-11-06 |
| 2016 |
Ispas, A., Cosma, C., Crăciun, A., Constantiniuc, M., Lascu, L., Leordean, D., Vilău, C. Influence of Ti-Ceramic or Ti-Composite crown on stress distribution: finite element study and additive manufacturing published pages: 904-912, ISSN: 1454-4164, DOI: |
Journal of Optoelectronics and Advanced Materials Vol 18 Issue 9-10 | 2019-11-06 |
| 2016 |
Burde A.V., Cuc S., Radu A., Rusu M.A., Cosma C.S., Câmpian R.S., Leordean D. Microstructural Analysis of the Interface Between Some Superalloys and Composite/Ceramic Materials published pages: 205-2014, ISSN: 1224-7154, DOI: |
Studia Universitatis Babes-Bolyai, Studia Chemia LXI, Issue 2 | 2019-11-06 |
| 2018 |
Mihai CIUPAN, Marcel POPA, Ioan Pavel ÅžOÅžA, Glad CONÅ¢IU, Emilia CIUPAN DEVELOPMENT AND TESTING OF MINERAL CASTING FOR USE IN STRUCTURAL ELEMENTS AND MOLD MAKING published pages: , ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING | 2019-11-06 |
| 2018 |
Turcin, C. Cosma, A. Abdallah, N. Balc Design for Additive Manufacturing a Sweat Gland Simulator published pages: , ISSN: , DOI: |
7th International Conference on Additive Technologies | 2019-11-06 |
| 2017 |
Morar, C., Popescu, A The design of a plastic injection mold for the part “Tensile Test Specimen†published pages: 319-324, ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Volume 60, No.2 | 2019-11-06 |
| 2018 |
C. Moldovan, C. Cosma, P. Berce, N. Balc Theoretical Analysis And Practical Case Studies of SLA, Polyjet and FDM Manufacturing Techniques published pages: , ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Vol. 61, No 3, | 2019-11-06 |
| 2016 |
Ovidiu-Aurelian DETEÅžAN, Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF THE GRAPHICAL SIMULATION OF TRR SMALL-SIZED ROBOT published pages: , ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Vol. 59, Issue 3 | 2019-11-06 |
| 2018 |
Pascalau N., Vuscan I., Jiang B., Panc N Research on influence of gear honing process on involute helical gears quality published pages: 114-119, ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering Vol 16 no 2 | 2019-11-06 |
| 2017 |
L. Jozsa, D. Leordean, C. Vilau Studies on designing and testing of a customized medical implant for the maxillofacial area published pages: , ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering Vol 15 No1 | 2019-11-06 |
| 2016 |
Mocean F, ACHIMAÅž G, BERE P, ACHIMAÅž S., The mechanical characteristics of composite materials used for the rehabilitation of canals by means of lining published pages: , ISSN: 1221-5872, DOI: |
Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering, Vol. 58, No. 1, | 2019-11-06 |
| 2016 |
Călin Ciprian Otel, Razvan Păcurar, Daniel Filip, Monica Steopan, Paul Frîncu \"Case Study for Replacing the DAM 6X40 Lathe with Doosan LYNX 220 Lathe for Processing the Part \"\"Body of Spark Plug\"\"\" published pages: 163-169, ISSN: 1662-7482, DOI: 10.4028/www.scientific.net/amm.859.163 |
Applied Mechanics and Materials 859 | 2019-11-06 |
| 2016 |
Ovidiu-Aurelian DETEÅžAN, Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI THE PATH PLANNING OF TRR SMALL-SIZED ROBOT published pages: , ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering Vol. 59, Issue 3 | 2019-11-06 |
| 2017 |
Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR PARTICULARITIES OF THE TURNING PROCESS FOR THE TITANIUM ALLOY Ti6Al4V published pages: , ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering vol 15, issue 2, | 2019-11-06 |
| 2018 |
Cosmin COSMA, Catalin MOLDOVAN, Ian CAMPBELL, Andrei COSMA, Nicolae BALC Theoretical analysis and practical case studies of powder-based additive manufacturing published pages: 369-378, ISSN: 1221-5872, DOI: |
Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering Vol. 61, Issue 3 | 2019-11-06 |
| 2017 |
Liana Hancu, Gabriel Marc, Adrian Popescu, Paul Bere, Simona Rodean Proposal for a composite structure and graphic design for a parking barrier published pages: 8004, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713708004 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2017 |
Sorin-Dumitru Grozav, Gabriel Nicodim Ciuşcă, Vasile Ceclan The lack of uniformity of the deformations and the degree of deforming in case of orbital deformation published pages: 5002, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713705002 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2016 |
Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI THE KINEMATIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES published pages: , ISSN: 1583-7904, DOI: |
ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING vol 14, issue 4, | 2019-11-06 |
| 2017 |
Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak The influence of build orientation on the mechanical properties of medical implants made from PA 2200 by Selective Laser Sintering published pages: 3009, ISSN: 2261-236X, DOI: 10.1051/matecconf/201711203009 |
MATEC Web of Conferences 112 | 2019-11-06 |
| 2018 |
Nicolae PANC, Alina POPAN, Adrian Sever RADU, Adrian POPESCU The influence of silicon rubber aging on parts obtained in flexible molds published pages: 363-368, ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Vol. 61, Issue 3 | 2019-11-06 |
| 2017 |
Vlad Bocanet, Nicolae Panc The influence of hole finishing strategies on quality published pages: 3001, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713703001 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2018 |
Razvan Pacurar, Ancuta Pacurar, Serban Pop Designing of an innovative extrusion system for metallic parts made by desktop 3D printing method published pages: 2009, ISSN: 2261-236X, DOI: 10.1051/matecconf/201817802009 |
MATEC Web of Conferences 178 | 2019-11-06 |
| 2018 |
Ioan-Doru Voina, Stefan Sattel, Glad Contiu, Adrian Faur, Bogdan Luca Reamers cutting edge preparation for improvement the GGG 40 machining published pages: 1014, ISSN: 2261-236X, DOI: 10.1051/matecconf/201817801014 |
MATEC Web of Conferences 178 | 2019-11-06 |
| 2017 |
George Arghir, BERE Paul Utilisation of composite materials in the model aircraft construction published pages: , ISSN: 1221-5872, DOI: |
Acta Technica Napocensis-Series: Applied Mathematics, Mechanics, and Engineering, Vol 60 Nr. 1, | 2019-11-06 |
| 2017 |
Vasile Ceclan, Sorin Grozav, Ivan Kuric Research on Inner Surface of Tubes Hydroformed published pages: 311-317, ISSN: 2080-4075, DOI: 10.12913/22998624/80900 |
Advances in Science and Technology Research Journal 11/4 | 2019-11-06 |
| 2017 |
Ioan Alexandru Popan, Nicolae Bâlc, Alina Ioana Popan Preliminary study on occurrence of composite material delamination processed by abrasive water jet cutting published pages: 2010, ISSN: 2261-236X, DOI: 10.1051/matecconf/201712102010 |
MATEC Web of Conferences 121 | 2019-11-06 |
| 2017 |
Panc N., Schonstein C., Vuscan I. The influence of accuracy in establishing the origin of the part on the machining accuracy published pages: 393-398, ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Vol 60 No3 | 2019-11-06 |
| 2017 |
Nelu Pascalau, Ioan Vuscan, Nicolae Panc Research on influence of gear parameters on noise, vibrations and harshness conditions for automatic transmissions run-off cycle published pages: 3010, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713703010 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2018 |
Adrian TRIF STUDIES ON THE CUTTING FORCES IN CASE OF STAINLESS STEEL TURNING OPERATION published pages: , ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering VOL. 16, ISSUE 2 | 2019-11-06 |
| 2017 |
Alexandru Rus, Vasile-Dănuţ Leordean, Petru Berce Silver Nanoparticles (AgNP) impregnated filters in drinking water disinfection published pages: 7007, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713707007 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2018 |
Faur, Adrian Sorin; Popa, Marcel Sabin; Contiu, Glad; Tomoiaga, Vlad; Luca, Bogdan Cornel RESEARCH REGARDING A REDUCED CONTACT BETWEEN THE FLANKS SURFACE AND THE MATERIAL DURING TAPPING IN ORDER TO INCREASE MACHINING PRODUCTIVITY published pages: , ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Vol 61 No 3 | 2019-11-06 |
| 2017 |
Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR EXPERIMENTAL STUDY OF SURFACE ROUGHNESS IN THE CASE OF TURNING OF FREE-CUTTING STEEL AUT20 (22S20) published pages: , ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering vol 15, issue 4 | 2019-11-06 |
| 2017 |
Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak Finite Element Analysis to determine the optimum contact pressure between the components of a hip implant made by using the Selective Laser Sintering and the Selective Laser Melting Technologies published pages: 2010, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713702010 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2018 |
Ioan Alexandru Popan, Nicolae Balc, Alina Popan, Alexandru Carean Experimental study on reverse engineering in case of composite materials cut by water jet cutting published pages: 3004, ISSN: 2261-236X, DOI: 10.1051/matecconf/201817803004 |
MATEC Web of Conferences 178 | 2019-11-06 |
| 2016 |
Claudiu Mihai NEDEZKI, Adrian TRIF, Florin BUGNAR EXPERIMENTAL STUDY OF THE CUTTING RESULTANT FORCE FROM THE ALUMINIUM ALLOY TURNING PROCESS EN AW 6082 published pages: , ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering vol 14, issue 4 | 2019-11-06 |
| 2018 |
H. F. Chicinaş, D. O. Jucan, T. F. Marinca, B. V. Neamțu, G. Conțiu, P. Götze, A. Eckert, C. O. Popa Influence of milling media on the structure and agglomeration behaviour of some hardmetal powder published pages: 342-347, ISSN: 0032-5899, DOI: 10.1080/00325899.2018.1476081 |
Powder Metallurgy 61/4 | 2019-11-06 |
| 2018 |
Frăţilă, D., Popan, A Analysis and optimization of cutting parameters in drilling operation of EM AW2007 aluminum alloy published pages: 19-26, ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering Vol.16 No1 | 2019-11-06 |
| 2018 |
Vasile Ceclan, Sorin Grozav Determination of the force required for the hydroforming of al 99,5 published pages: 1003, ISSN: 2261-236X, DOI: 10.1051/matecconf/201824401003 |
MATEC Web of Conferences 244 | 2019-11-06 |
| 2018 |
Claudiu Mihai NEDEZKI and AdrianTRIF EXPERIMENTAL STUDY OF CUTTING PROCESSABILITY USING FACTORY METHODS published pages: , ISSN: 1583-7904, DOI: |
ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING VOL. 16, ISSUE 3 | 2019-11-06 |
| 2018 |
TOMOIAGÄ‚, Vlad-Bogdan; POPA, Marcel Sabin; CONÈšIU, Glad; FAUR, Adrian Sorin; SATTEL, Stefan INFLUENCE OF THE MICROGEOMETRY ON THE DRILLING PROCESS IN INCONEL 718 published pages: , ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Vol 61, no 3 | 2019-11-06 |
| 2016 |
Neamțu C., Popescu, S., Bere P., Comes, R., Innovative mechanical structure for hospital bed folding using a single actuator published pages: , ISSN: 1221-5872, DOI: |
Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering Vol. 59, 4 | 2019-11-06 |
| 2017 |
Vlad-Bogdan Tomoiagă, Marcel Sabin Popa, Stefan Sattel, Glad Conțiu, Marius Bozga Finite element simulation of the C70 orthogonal cutting process published pages: 6011, ISSN: 2261-236X, DOI: 10.1051/matecconf/201711206011 |
MATEC Web of Conferences 112 | 2019-11-06 |
| 2018 |
H.F. Chicinaş, T.F. Marinca, B.V. Neamțu, G. Conțiu, O. Isnard, I. Chicinaş Influence of process control agent type on the mechanosynthesis of Fe 3 O 4 particles published pages: 1838-1847, ISSN: 0921-8831, DOI: 10.1016/j.apt.2018.04.020 |
Advanced Powder Technology 29/8 | 2019-11-06 |
| 2018 |
Popescu, A., Hancu, L., Sabau, E Effect of temperature on the mechanical properties of extrusion glass fiber reinforced polyamide 6.6 composites (GFRPA 6.6) published pages: 213-218, ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Volume 61, No.2 | 2019-11-06 |
| 2018 |
Mihai Tripa, Geamilia Şolea, Dorina Sorcoi, Iulia Florescu, Adriana Sorcoi, Daniela Păunescu, Nicolae Bâlc, Mihaela Suciu About buckling calculus of straight bars on elastic environment by Transfer-Matrix Method (TMM) for dental implants published pages: 4007, ISSN: 2261-236X, DOI: 10.1051/matecconf/201817804007 |
MATEC Web of Conferences 178 | 2019-11-06 |
| 2018 |
Petru Paul DINCU, Gheorghe ACHIMAȘ, Adriana NEAG and Adrian TRIF ANALYSIS DISTRIBUTION OF THE EQUIVALENT PLASTIC STRAIN, CONTACT PRESSURE AND TEMPERATURE DURING THE METAL TUBES EXTRUSION published pages: , ISSN: 1583-7904, DOI: |
ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING VOL.16, ISSUE 1 | 2019-11-06 |
| 2017 |
C. Cosma, N. Balc, P. Berce, A. Popan, A. Cosma, A. Burde Direct manufacturing of customized implants from biometals, by 3D printing published pages: 42-49, ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering Vol. 15, No. 4 | 2019-11-06 |
| 2017 |
Ioan Turcin, Selver Softic, Udo Traussnigg, Adrian Trif Initial Study on the State of the Art Solutions for the Simulation of the Thermoregulatory Sweating Conditions published pages: 1016, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713701016 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2017 |
Alina Ioana POPAN, Bogdan LUCA, Alexandru CAREAN Experimental studies on manufacturing of the complex shapes made from copper published pages: 6005, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713706005 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2017 |
Paul Bere, Calin Neamtu, Mircea Dudescu, Radu Comes, Sergiu Solcan Carbon epoxy front hood for an electrical city vehicle published pages: 8001, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713708001 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2018 |
Adrian TRIF and Claudiu Mihai NEDEZKI EXPERIMENTAL STUDY OF AXIAL FORCE AND OF TORQUE IN CASE OF OLC45 STEEL DRILLING, USING EXPONENTIAL CALCULATION MODEL published pages: , ISSN: 1583-7904, DOI: |
ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING VOL. 16, ISSUE 4 | 2019-11-06 |
| 2017 |
Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF DYNAMIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES published pages: , ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering Vol. 60, Issue I | 2019-11-06 |
| 2017 |
Paul Bere, Adrian Popescu, Cristian Dudescu, Liana Hancu Influence of the stacking sequence on the mechanical proprieties of glass fiber reinforced polymer published pages: 4006, ISSN: 2261-236X, DOI: 10.1051/matecconf/201711204006 |
MATEC Web of Conferences 112 | 2019-11-06 |
| 2018 |
Schonstein C., Panc N. Establishing the jacobian matrix for a three degrees of freedom serial structure published pages: 93-98, ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Volume 61, No. 1 | 2019-11-06 |
| 2018 |
Becze S., Vuscan I., Jiang B., Panc N. Evaluation of the turbocharger center housing flange influence onvibration measurements published pages: 114-119, ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering Volume 16, Issue 2 | 2019-11-06 |
| 2017 |
Popan Ioan Alexandru; Popan Alina Ioana Experimental study on manufacturing complex parts from composite materials using water jet cutting published pages: 251-254, ISSN: 1221-5872, DOI: |
Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering Vol. 60, Issue 2 | 2019-11-06 |
| 2018 |
Borzan, Cristina Stefana Miron; Moldovan, Marioara; Bocanet, Vlad Evaluation of Surface Modification of PA 2200 Parts Made by Selective Laser Sintering Process published pages: 886-889, ISSN: 0034-7752, DOI: |
REVISTA DE CHIMIE 69, 4 | 2019-11-06 |
| 2017 |
Ioan Alexandru Popan, Alina Ioana Popan, Sorin Cosmin Cosma, Alexandru Carean Analyses of process parameters influence on the drilling process by using carbide drills for steel St52-3 published pages: 2011, ISSN: 2261-236X, DOI: 10.1051/matecconf/20179402011 |
MATEC Web of Conferences 94 | 2019-11-06 |
| 2017 |
Paul Bere, Calin Neamtu, Cristian Dudescu Design and manufacturing front hood for electric vehicle by carbon fibber published pages: 7021, ISSN: 2261-236X, DOI: 10.1051/matecconf/201711207021 |
MATEC Web of Conferences 112 | 2019-11-06 |
| 2017 |
Schonstein C.,Negrea I., Panc N., Geometrical modelling using matrix exponential functions for a serial robot structure published pages: 403-408, ISSN: 1221-5872, DOI: |
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING Vol 60 (3) | 2019-11-06 |
| 2017 |
Ioan Alexandru POPAN, Glad CONTIU, Ian CAMPBELL Investigation on standoff distance influence on kerf characteristics in abrasive water jet cutting of composite materials published pages: 1009, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713701009 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2017 |
V Samuilă, V F Soporan, G Conțiu, S Pădurețu, T R Lehene, M M Vescan Hierarchical modeling of professional skills in the field of castings manufacture engineering published pages: 12095, ISSN: 1757-8981, DOI: 10.1088/1757-899x/209/1/012095 |
IOP Conference Series: Materials Science and Engineering 209 | 2019-11-06 |
| 2017 |
Cosma, N. Balc, M. Moldovan, L. Morovic, P. Gogola, C. Borzan Post-processing of customized implants made by laser beam melting from pure Titanium published pages: 738-747, ISSN: 1454-4164, DOI: |
Journal of Optoelectronics and Advanced Materials Vol. 19, No. 11-12 | 2019-11-06 |
| 2018 |
Sorin Dumitru Grozav, Vasile Adrian Ceclan, Gabriel Nicodim Ciusca Calculation of the contact surface in the orbital deformation of the cylindrical workpiece published pages: 695-700, ISSN: 1221-5872, DOI: |
Acta Technica Napocensis, Series: Applied mathematics, mechanics and engineering vol 61 no 4 | 2019-11-06 |
| 2017 |
Mircea A. Rusu, Dan Leordean, Cosmin Cosma, Miuta Filip, Marioara Moldovan, Laura Silaghi-Dumitrescu, Olga Hilda Orasan Characterization polyethylene terephthalate nanocomposites mixing with nano-silica and titanium oxide published pages: 8005, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713708005 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2017 |
Ancuţa Păcurar, Răzvan Păcurar, Beáta Erőss, Florin Popister, Calin Ciprian Otel Decreasing of the manufacturing time for a thermoforming mold by applying the DFM principles published pages: 1008, ISSN: 2261-236X, DOI: 10.1051/matecconf/201713701008 |
MATEC Web of Conferences 137 | 2019-11-06 |
| 2017 |
Nicolae Bâlc, Cristian Vilău Design for Additive Manufacturing, to produce assembled products, by SLS published pages: 4002, ISSN: 2261-236X, DOI: 10.1051/matecconf/201712104002 |
MATEC Web of Conferences 121 | 2019-11-06 |
| 2017 |
Alexandru BUCUR, Gheorghe ACHIMAȘ, Lucian LĂZĂRESCU, Adrian TRIF, Grigore Marian POP EVALUATION OF BIODEGRADABLE LUBRICANTS BY FORWARD CONICAL CUP – BACKWARD STRAIGHT CUP EXTRUSION TEST published pages: 43-48, ISSN: 1583-7904, DOI: |
Academic Journal of Manufacturing Engineering Volume 15, Issue 3 | 2019-11-06 |
| 2017 |
Paul Bere, Jolanta B. Krolczyk Determination of mechanical properties of carbon/epoxy plates by tensile stress test published pages: 3018, ISSN: 2267-1242, DOI: 10.1051/e3sconf/20171903018 |
E3S Web of Conferences 19 | 2019-11-06 |
| 2016 |
Lazar, M.-A., Rotaru, H., Prodan, D, Roman, C.R., Câmpian, R.S. Bere P Evaluation of the morphology and structure of e glass fiber-reinforced composites for cranio-facial bone reconstruction published pages: 249-260, ISSN: 1224-7154, DOI: |
Studia Universitatis Babes-Bolyai Chemia 61/2 | 2019-11-06 |
Are you the coordinator (or a participant) of this project? Plaese send me more information about the "AMATUC" project.
For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.
Send me an email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.
Thanks. And then put a link of this page into your project's website.
The information about "AMATUC" are provided by the European Opendata Portal: CORDIS opendata.
More projects from the same programme (H2020-EU.4.b.)
SPINTECH (2018)
Boosting the scientific excellence and innovation capacity in spintronics of the D. GHITU Institute of Electronic Engineering and Nanotechnologies of the Academy of Science of Moldova
Read More