Coordinatore | ACCENT PRO 2000 s.r.l.
Organization address
address: "Nerva Traian 1, K6, Sc. 1, Ap. 26, Sector 3" contact info |
Nazionalità Coordinatore | Romania [RO] |
Totale costo | 1˙434˙540 € |
EC contributo | 1˙103˙800 € |
Programma | FP7-SME
Specific Programme "Capacities": Research for the benefit of SMEs |
Code Call | FP7-SME-2011 |
Funding Scheme | BSG-SME |
Anno di inizio | 2011 |
Periodo (anno-mese-giorno) | 2011-11-01 - 2013-12-31 |
# | ||||
---|---|---|---|---|
1 |
ACCENT PRO 2000 s.r.l.
Organization address
address: "Nerva Traian 1, K6, Sc. 1, Ap. 26, Sector 3" contact info |
RO (Bucharest) | coordinator | 346˙180.90 |
2 |
INTRINSIQ MATERIALS LIMITED
Organization address
address: IVELY ROAD Y 25 ROOM G10 contact info |
UK (FARNBOROUGH) | participant | 314˙025.00 |
3 |
ORME SARL
Organization address
address: RUE PIERRE GILLES DE GENNES 227 contact info |
FR (LABEGE CEDEX) | participant | 236˙100.10 |
4 |
TWI LIMITED
Organization address
address: Granta Park, Great Abington contact info |
UK (CAMBRIDGE) | participant | 72˙744.00 |
5 |
BRUNEL UNIVERSITY
Organization address
address: Kingston Lane contact info |
UK (UXBRIDGE) | participant | 65˙100.00 |
6 |
OLED TECHNOLOGIES BV
Organization address
address: JAN CAMPERTSTRAAT 7 A contact info |
NL (HEERLEN) | participant | 36˙050.00 |
7 |
FUNDACION PRIVADA CETEMMSA
Organization address
address: AVINGUDA ERNEST LLUCH 36 contact info |
ES (MATARO) | participant | 33˙600.00 |
8 |
OLED TECHNOLOGIES & SOLUTIONS BV
Organization address
address: JAN CAMPERTSTRAAT 7A contact info |
NL (HEERLEN) | participant | 0.00 |
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
'Plastic electronics is a general term used to describe electronic devices based on electrically conducting polymers i.e. organic electronic materials as opposed to solid state inorganic electronic materials like silicon etc. These materials hold promise of a future revolution in consumer electronics because both the devices and circuit connections based on them can be physically flexible and produced from solution by ink jet printing, coating and spraying, all far cheaper and faster processes than the etching and photolithography systems required to produce the inflexible inorganic devices and printed circuit boards which dominate the present electronics market. Furthermore Organic Light Emitting Diode (OLED) displays compared with LCD/LED displays and plasma displays provide superior images and need 70% less power. Prototype or first generation OLED display panels and various other plastic electronics devices have already appeared, and the global market is forecast to grow from the present level of €0.5bn to €96bn by 2019 and €330bn by 2029. However, many types of defect specific to plastic electronics processing arise during manufacture and as there is no online inspection, scrap rates after production are very high, keeping the costs high, which threatens the market promise. So the goal of the PlastronicsSpec project is to perform real time, online, and 100% volumetric inspection by digital, real time radiography leading to automatic and instant rejection of all defective product and instant production process corrections with minimum wastage. Novel, simultaneous multimode signal processing will be used to maximise the use of X-ray photons from a wide X-ray viewing angle, resulting in the smallest possible minimum detectable defect depths (2.5nm) with the highest spatial resolutions (100um) limited only by quantum fluctuations. It is estimated that from 2015-18 the ROI for the SMEs/EU 303:1 and the economic benefit of wide acceptance of the technology €4bn'
Plastic electronics pave the way to a number of innovative products, but mass manufacturing is hindered by the lack of in-line defect detection. EU-funded scientists are developing X-ray radiography technology to unlock the treasure chest.
Development of a sustainable and cost effective ballast water treatment technology with reverse pulsed DC electric field that excludes formation of oxidising free radicals
Read MoreDeveloping innovative method for recycling used chip board furniture and plastics by producing new environment friendly reusable multipurpose composite material
Read More