SMARTLAM
Smart production of Microsystems based on laminated polymer films
| Coordinatore | Karlsruher Institut fuer Technologie
Organization address
address: Kaiserstrasse 12 contact info |
| Nazionalità Coordinatore | Germany [DE] |
| Sito del progetto | http://www.smartlam.eu/ |
| Totale costo | 3˙633˙791 € |
| EC contributo | 2˙673˙000 € |
| Programma | FP7-NMP
Specific Programme "Cooperation": Nanosciences, Nanotechnologies, Materials and new Production Technologies |
| Code Call | FP7-2012-NMP-ICT-FoF |
| Funding Scheme | CP-FP |
| Anno di inizio | 2012 |
| Periodo (anno-mese-giorno) | 2012-10-01 - 2016-01-31 |
Partecipanti
| # | ||||
|---|---|---|---|---|
| 1 |
Karlsruher Institut fuer Technologie
Organization address
address: Kaiserstrasse 12 contact info |
DE (Karlsruhe) | coordinator | 627˙667.35 |
| 2 |
FRAUNHOFER-GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V
Organization address
address: Hansastrasse 27C contact info |
DE (MUENCHEN) | participant | 455˙935.22 |
| 3 |
PROFACTOR GMBH
Organization address
address: IM STADTGUT A2 contact info |
AT (STEYR-GLEINK) | participant | 388˙582.64 |
| 4 |
THE UNIVERSITY OF NOTTINGHAM
Organization address
address: University Park contact info |
UK (NOTTINGHAM) | participant | 380˙397.95 |
| 5 |
NORBERT SCHLAFLI MASCHINEN
Organization address
address: MUHLETHALSTRASSE 69 contact info |
CH (ZOFINGEN) | participant | 238˙423.29 |
| 6 |
MARTIN HEDGES
Organization address
address: PETZOLTSTRASSE 3 contact info |
DE (NURNBERG) | participant | 217˙361.25 |
| 7 |
DESIGN LED PRODUCTS LTD
Organization address
address: Alba Innovation Centre Alba Campus - contact info |
UK (LIVINGSTON) | participant | 205˙560.00 |
| 8 |
MICRUX FLUIDIC SL
Organization address
address: CALLE JULIAN CLAVERIA - EDIFICIO SCTS SEVERO OCHOA S/N contact info |
ES (OVIEDO) | participant | 122˙792.00 |
| 9 |
ACI ECOTEC GMBH
Organization address
address: Albring 18 contact info |
DE (Zimmern ob Rottweil) | participant | 36˙280.30 |
Mappa
Word cloud
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
Obiettivo del progetto (Objective)
'Today´s fabrication methods for micro devices can require expensive tooling and long turnaround times, making empirical, performance-based modifications to the design expensive and time consuming. These methods also are limited in their flexibility, so that complex devices, that incorporate on-board valves, separation media, membranes, and recirculating pumps, cannot be developed and adapted without considerable expense in molds and assembly fixtures. This creates a barrier to the development of medium to large series of complex and higher functionality devices, where the cost-benefit ratio of incorporating functionality is too risky for the typical laboratory, diagnostic or medical device developer. To bridge the gap between a high volume production with specialized equipment and a - until today - not efficient production of medium series, SME´s need to find other, more flexible and scalable approaches to produce microsystems in high volumes. The solution proposed by SMARTLAM builds on a modular, flexible, scalable 3D-Integration scenario (3D-I), where novel polymer film materials will be combined with state of the art, scalable 3D printing, structuring and welding technologies. These technologies will be integrated in one production cell allowing for the production of complete 3D Microsystems. A 3D-Integration modeling environment will be set up to support users of the SMARTLAM environment by the design of 3D-I hardware compatible microsystems. Besides the technological challenges SMARTLAM will demonstrate a complete business case. A SME company acting as OEM service provider will be responsible for “the real world” benchmarking and testing of the SMARTLAM production platform concept. To assess and demonstrate the potential of SMARTLAM, two SME demonstrator partners will take over the role of potential customers, both providing input as well as assessing the 3-DI approach regarding costs, technological capabilities and adaptiveness.'
Introduzione (Teaser)
The market for multifunctional microsystems made of 3D layered materials is growing. A novel design and manufacturing platform promises to revolutionise the way things are done and enhance EU market position.