Coordinatore | CAPENERGIES ASSOCIATION
Organization address
address: AVENUE LOUIS PHILIBERT BATIMENT HENRI POINCARE DOMAINE DU PETIT ARBOIS contact info |
Nazionalità Coordinatore | France [FR] |
Totale costo | 1˙973˙516 € |
EC contributo | 1˙469˙000 € |
Programma | FP7-SME
Specific Programme "Capacities": Research for the benefit of SMEs |
Code Call | FP7-SME-2013 |
Funding Scheme | BSG-SME-AG |
Anno di inizio | 2014 |
Periodo (anno-mese-giorno) | 2014-03-01 - 2017-02-28 |
# | ||||
---|---|---|---|---|
1 |
CAPENERGIES ASSOCIATION
Organization address
address: AVENUE LOUIS PHILIBERT BATIMENT HENRI POINCARE DOMAINE DU PETIT ARBOIS contact info |
FR (AIX EN PROVENCE CEDEX 3) | coordinator | 277˙342.60 |
2 |
AALBORG KOMMUNE
Organization address
address: BOULEVARDEN 13 contact info |
DK (AALBORG) | participant | 300˙729.00 |
3 |
Associazione Italiana Prove Non Distruttive
Organization address
address: Via Foresti 5 contact info |
IT (BRESCIA) | participant | 297˙604.65 |
4 |
AGRUPACION PYME PARA LA SINERGIA EN I MAS D SL
Organization address
address: CALLE ESTACION 29 PLANTA 1 PUERTA 3 contact info |
ES (CALDES DE MONTBUI BARCELONA) | participant | 275˙847.25 |
5 |
TWI LIMITED
Organization address
address: Granta Park, Great Abington contact info |
UK (CAMBRIDGE) | participant | 81˙178.00 |
6 |
CENTRE TECHNIQUE DES INDUSTRIES MECANIQUES
Organization address
address: AVENUE FELIX LOUAT 52 contact info |
FR (SENLIS CEDEX) | participant | 57˙425.00 |
7 |
TEKNISK DATA AS
Organization address
address: STALVERKSVEIEN 1 A contact info |
NO (OSLO) | participant | 45˙257.00 |
8 |
SMITHERS PURSLOW PROPERTY SERVICES LTD
Organization address
address: GLASTON HALL SPRING LANE GLASTON contact info |
UK (OAKHAM RUTLAND) | participant | 39˙685.50 |
9 |
KINGSTON COMPUTER CONSULTANCY LIMITED
Organization address
address: WORSHIP STREET, CRYSTAL GATE 28-30 contact info |
UK (LONDON) | participant | 33˙580.00 |
10 |
INNORA PROIGMENA TECHNOLOGIKA SYSTIMATA KAI YPIRESIES AE
Organization address
address: IOANNOY METAXA 59 KARELAS 59 contact info |
EL (KOROPI ATTIKIS) | participant | 33˙401.00 |
11 |
WLB LIMITED
Organization address
address: ZINONOS SOZOU (OFFICE 103) 11 contact info |
CY (LEFKOSIA) | participant | 26˙950.00 |
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
There is a growing interest in monitoring techniques and systems which can provide information about the condition of a wind turbine support structure, owing to a number of operational factors which have become apparent as increased numbers of turbine installations are experiencing longer periods of time in service. These include: • Instances of fatigue cracking in the support towers • Flange bolts at the ends of the tower sections becoming loose • Higher than expected levels of vibration, which could cause either of the above mechanisms • Degradation of the grouted joint between the pile and transition piece in offshore installations. Wind farm operators are becoming increasingly concerned at the inability to predict remaining life of the installations, as this a rapidly expanding sector and there is little information about likely rates of structural degradation and failure modes. In addition, experience from operation of older wind farms is of limited value, because the specification of these installations is evolving rapidly, with the capacity (and therefore size and weight) of the generator becoming larger and the consequent dimensions of the tower increasing. The effect is that it is very difficult to extrapolate experience with existing structures to the likely behaviour of new ones. On these installations there are very large surface areas/volumes of material to be examined and degradation may occur almost anywhere, so that the inspection task is not trivial. Furthermore, there is no established structural monitoring industry dedicated to the wind sector. The aim of this project is the development of suitable and reliable techniques for monitoring of wind turbine tower structures and joint that could suffer from grout damage and slippage. This project will also develop a best practice and standardisation of the methods involved and that a programme of information and training for inspection personnel is produced and implemented.
Development of a new Bio-Composite from renewable resources with improved thermal and fire resistance for manufacturing a truck internal part with high quality surface finishing
Read MoreA novel NIR-based instrument for in-line monitoring during injection moulding
Read MoreDevelopment of novel sintered sphere filtering technique for moulding opaper pulp to reduce energy consumption and environmental effects of plastic
Read More