Opendata, web and dolomites

Eco-UV SIGNED

Low carbon footprint and eco-innovative UV water disinfection

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "Eco-UV" data sheet

The following table provides information about the project.

Coordinator
HANOVIA LIMITED 

Organization address
address: 780 BUCKINGHAM AVENUE
city: SLOUGH
postcode: SL1 4LA
website: n.a.

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country United Kingdom [UK]
 Project website http://www.eco-uvinnovation.eu
 Total cost 4˙494˙948 €
 EC max contribution 3˙949˙129 € (88%)
 Programme 1. H2020-EU.3.5.4. (Enabling the transition towards a green economy and society through eco-innovation)
 Code Call H2020-WATER-2014-two-stage
 Funding Scheme IA
 Starting year 2015
 Duration (year-month-day) from 2015-06-01   to  2018-11-30

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    HANOVIA LIMITED UK (SLOUGH) coordinator 1˙273˙578.00
2    KARLSRUHER INSTITUT FUER TECHNOLOGIE DE (KARLSRUHE) participant 1˙239˙623.00
3    DVGW DEUTSCHER VEREIN DES GAS- UND WASSERFACHES - TECHNISCH-WISSENSCHAFTLICHER VEREIN EV DE (BONN) participant 940˙271.00
4    IVL SVENSKA MILJOEINSTITUTET AB SE (STOCKHOLM) participant 495˙656.00

Map

 Project objective

The central objective for Eco-UV is the demonstration and characterisation of an innovative UV lamp and driving electronics technology for chemical-free water treatment and disinfection. The newly implemented technology is a ground-breaking innovation providing up to four times increased lifetime with greatly increased efficiency, the energy consumption reduced by 80%. Thus, this technology provides a lower carbon footprint, much improved energy use and hence greatly reduced lifetime costs. Additionally, the innovative technology will be introduced with a mercury-free configuration, removing the need to handle with this hazardous substance in manufacture and disposal, hence providing a sustainable and eco-innovative technology. The project will prove the lamp technology by demonstration in real applications with full characterisation in terms of long-term stability, ageing effects and dose-response-relationship. Furthermore, the UV lamps are integrated in reactors and the performance of the whole UV system is evaluated at a test centre for drinking water. A new testing protocol for different end-users applications will furthermore be derived, which will be the basis for a future standardised validation of industrial UV applications. The technology will be installed at three demonstration sites for an extended running period. At each, the treatment performance of the UV systems will be evaluated according to the inactivation of micro organisms and the reduction of application specific chemicals, e. g. antibiotics and pesticides. A full Life Cycle evaluation of cost and environmental benefits will be disseminated via EU ETV forums to ensure active uptake of the technology offering by comparing it to traditional UV technology in terms of energy, infrastructure and lifetime costs. The proposed UV technology is addressing the thematic priority areas as outlined in the EIP on Water, especially water reuse, water treatment, water governance and the water-energy nexus.

 Deliverables

List of deliverables.
Website complete Other 2020-03-06 16:00:51
Lifecycle Savings Report Documents, reports 2020-03-06 16:00:37
Review of safety and operation report Documents, reports 2020-03-06 16:00:44
4-off high efficiency lamp systems ready for installation Demonstrators, pilots, prototypes 2020-03-06 16:00:37
Exploitation plan complete Other 2020-03-06 16:00:25
Environmental impact study and quantitative evaluation report Documents, reports 2020-03-06 16:00:33
Final product specification of high-efficiency UV-lamps and adjusted electronic ballasts Demonstrators, pilots, prototypes 2020-03-06 16:00:27
Final report published Other 2020-03-06 16:00:28
4-off mercury-free, ultra-high efficiency lamp demonstrators Demonstrators, pilots, prototypes 2020-03-06 16:00:50
Conference schedule defined Other 2019-04-29 09:31:56

Take a look to the deliverables list in detail:  detailed list of Eco-UV deliverables.

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "ECO-UV" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "ECO-UV" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.3.5.4.)

PROMPT (2019)

PRemature Obsolescence Multi-Stakeholder Product Testing Program

Read More  

CE2019 (2019)

The sustainable transition to a low carbon, climate-resilient circular economy: Creating the knowledge base

Read More  

CICERONE (2018)

CIrCular Economy platfoRm for eurOpeaN priorities strategic agEnda

Read More