Opendata, web and dolomites
CORREL-CT SIGNED
Correlative tomography
Total Cost €
0EC-Contrib. €
0Partnership
0Views
0CORREL-CT project word cloud
Explore the words cloud of the CORREL-CT project. It provides you a very rough idea of what is the project "CORREL-CT" about.
demanding
completion
modalities
scales
facets
life
capability
ray
light
bulk
located
single
natural
4d
combine
made
successful
cultural
below
destructive
chemistry
3dtime
grain
volume
multiscale
heterogeneous
examine
add
material
nucleation
accumulation
tomography
voi
platform
materials
models
degradation
science
man
uses
vision
faceted
surface
secondly
yield
nature
proposal
heritage
structured
engineering
morphological
analogues
progressive
arising
hierarchical
data
alongside
connect
crystal
food
conventional
coupling
track
shed
experimental
summary
nano
page
3d
radically
electron
performance
gain
morphology
picture
half
local
mapping
damage
geology
propagation
mechanical
correlative
chemical
mechanisms
strategies
structural
insights
multiple
firstly
imaging
platforms
techniques
stress
deep
aggregation
Project "CORREL-CT" data sheet
The following table provides information about the project.
| Coordinator |
THE UNIVERSITY OF MANCHESTER
Organization address contact info |
| Coordinator Country | United Kingdom [UK] |
| Project website | https://www.research.manchester.ac.uk/portal/p.j.withers.html |
| Total cost | 2˙926˙425 € |
| EC max contribution | 2˙926˙425 € (100%) |
| Programme |
1. H2020-EU.1.1. (EXCELLENT SCIENCE - European Research Council (ERC)) |
| Code Call | ERC-2015-AdG |
| Funding Scheme | ERC-ADG |
| Starting year | 2016 |
| Duration (year-month-day) | from 2016-11-01 to 2021-10-31 |
Partnership
Take a look of project's partnership.
| # | ||||
|---|---|---|---|---|
| 1 | THE UNIVERSITY OF MANCHESTER | UK (MANCHESTER) | coordinator | 2˙926˙425.00 |
Map
Project objective
Proposal summary (half page) The vision is firstly, to develop correlative tomography to radically increase the nature and level of information (morphological, structural and chemical) that can be obtained for a 3D volume of interest (VoI) deep within a material or component by coupling non-destructive (3Dtime) X-ray tomography with destructive (3D) electron tomography and, secondly to exploit this new approach to shed light on damage accumulation processes arising under demanding conditions. Successful completion of this project will provide new 3D & 4D insights across many areas and yield key experimental data for multiscale models. Objective 1: To build the capability of correlative tomography - To connect platforms across scales and modalities in order to track a VoI that may be located deep below the surface and to combine multiple techniques within a single platform. - To add new facets to correlative tomography including 3D chemical imaging 3D crystal grain mapping the local stress distribution mechanical performance mapping at the VoI scale Objective 2: To apply it to gain new insights into damage accumulation Correlative tomography will provide a much richer multi-faceted hierarchical picture of materials behaviour from life science to food science from geology to cultural heritage. This project will focus specifically on identifying the nucleation, propagation and aggregation of damage processes in engineering materials. - We will identify and track the mechanisms that control the progressive degradation of conventional bulk engineering materials operating under demanding conditions. - We will examine the hierarchical strategies nature uses to control failure in natural materials through heterogeneous chemistry, morphology and properties. Alongside this we will examine the behaviour of man-made nano-structured analogues and whether we can exploit some of these strategies.
Publications
| year | authors and title | journal | last update |
|---|---|---|---|
| 2019 |
V C Gudla, A Garner, M Storm, P Gajjar, J Carr, B C Palmer, J J Lewandowski, P J Withers, N J H Holroyd, T L Burnett Initiation and short crack growth behaviour of environmentally induced cracks in AA5083 H131 investigated across time and length scales published pages: , ISSN: 2191-0316, DOI: |
Corrosion Reviews | 2019-09-06 |
| 2018 |
James D. B. O\'Sullivan, Julia Behnsen, Tobias Starborg, Andrew S. MacDonald, Alexander T. Phythian-Adams, Kathryn J. Else, Sheena M. Cruickshank, Philip J. Withers X-ray micro-computed tomography ( μ CT): an emerging opportunity in parasite imaging published pages: 848-854, ISSN: 0031-1820, DOI: 10.1017/S0031182017002074 |
Parasitology 145/7 | 2019-09-06 |
| 2017 |
Maksimcuka, J.; Obata, A.; Sampson, W. W.; Blanc, R.; Gao, C.; Withers, P. J.; Tsigkou, O.; Kasuga, T.; Lee, P. D.; Poologasundarampillai, G. X-ray tomographic imaging of tensile deformation modes of electrospun biodegradable polyester fibers published pages: , ISSN: 2296-8016, DOI: |
Frontiers in Materials , 4 , Article 43. (2017) 3 | 2019-09-06 |
| 2018 |
Saransh Singh, Yi Guo, Bartłomiej Winiarski, Timothy L. Burnett, Philip J. Withers, Marc De Graef High resolution low kV EBSD of heavily deformed and nanocrystalline Aluminium by dictionary-based indexing published pages: , ISSN: 2045-2322, DOI: 10.1038/s41598-018-29315-8 |
Scientific Reports 8/1 | 2019-09-06 |
| 2019 |
T. L. Burnett, P. J. Withers Completing the picture through correlative characterization published pages: , ISSN: 1476-1122, DOI: 10.1038/s41563-019-0402-8 |
Nature Materials | 2019-09-06 |
| 2019 |
Chu Lun Alex Leung, Sebastian Marussi, Michael Towrie, Robert C. Atwood, Philip J. Withers, Peter D. Lee The effect of powder oxidation on defect formation in laser additive manufacturing published pages: 294-305, ISSN: 1359-6454, DOI: 10.1016/j.actamat.2018.12.027 |
Acta Materialia 166 | 2019-09-06 |
| 2018 |
Xun Zhang, Justyna Kulczyk-Malecka, James Carr, Ping Xiao, Philip  J. Withers 3D characterization of porosity in an air plasma-sprayed thermal barrier coating and its effect on thermal conductivity published pages: 2482-2492, ISSN: 0002-7820, DOI: 10.1111/jace.15409 |
Journal of the American Ceramic Society 101/6 | 2019-09-06 |
| 2018 |
Cem Örnek, Fabien Léonard, Samuel A. McDonald, Anuj Prajapati, Philip J. Withers, Dirk L. Engelberg Time-dependent in situ measurement of atmospheric corrosion rates of duplex stainless steel wires published pages: , ISSN: 2397-2106, DOI: 10.1038/s41529-018-0030-9 |
npj Materials Degradation 2/1 | 2019-09-06 |
| 2019 |
M.E. Curd, T.L. Burnett, J. Fellowes, J. Donoghue, P. Yan, P.J. Withers The heterogenous distribution of white etching matter (WEM) around subsurface cracks in bearing steels published pages: 300-309, ISSN: 1359-6454, DOI: 10.1016/j.actamat.2019.05.052 |
Acta Materialia 174 | 2019-09-06 |
| 2019 |
Tobias Starborg, James D.B. O\'Sullivan, Claudia Martins Carneiro, Julia Behnsen, Kathryn J. Else, Richard K. Grencis, Philip J. Withers Experimental steering of electron microscopy studies using prior X-ray computed tomography published pages: 58-67, ISSN: 0304-3991, DOI: 10.1016/j.ultramic.2019.03.002 |
Ultramicroscopy 201 | 2019-09-06 |
| 2019 |
Dan Sykes, Rebecca Hartwell, Rob S. Bradley, Timothy L. Burnett, Benjamin Hornberger, Russell J. Garwood, Philip J. Withers Time-lapse three-dimensional imaging of crack propagation in beetle cuticle published pages: 109-116, ISSN: 1742-7061, DOI: 10.1016/j.actbio.2019.01.031 |
Acta Biomaterialia 86 | 2019-09-06 |
| 2019 |
Xuekun Lu, Marta Peña Fernández, Robert S Bradley, Shelley D Rawson, Marie O\'Brien, Benjamin Hornberger, Marty Leibowitz, Gianluca Tozzi, Philip J Withers Anisotropic Crack Propagation and Deformation in Dentin Observed by Four-Dimensional X-ray Nano-Computed Tomography published pages: , ISSN: 1742-7061, DOI: 10.1016/j.actbio.2019.06.042 |
Acta Biomaterialia | 2019-09-06 |
| 2017 |
P. Lopez-Crespo; J. Vazquez-Peralta; C. Simpson; T. Buslaps; P. J. Withers Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel published pages: , ISSN: 1971-8993, DOI: 10.3221/IGF-ESIS.41.28 |
\'Frattura ed Integrità Strutturale \', vol: 41 , pages: 203-210 (2017) 1 | 2019-09-06 |
| 2017 |
F. Léonard, J. Stein, C. Soutis, P.J. Withers The quantification of impact damage distribution in composite laminates by analysis of X-ray computed tomograms published pages: 139-148, ISSN: 0266-3538, DOI: 10.1016/j.compscitech.2017.08.034 |
Composites Science and Technology 152 | 2019-09-06 |
| 2017 |
S. Pawar, T.J.A. Slater, T.L. Burnett, X. Zhou, G.M. Scamans, Z. Fan, G.E. Thompson, P.J. Withers Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet published pages: 90-99, ISSN: 1359-6454, DOI: 10.1016/j.actamat.2017.05.027 |
Acta Materialia 133 | 2019-09-06 |
| 2018 |
Mina Bergstad, Dani Or, Philip J. Withers, Nima Shokri Evaporation Dynamics and NaCl Precipitation on Capillarity-Coupled Heterogeneous Porous Surfaces published pages: 3876-3885, ISSN: 0043-1397, DOI: 10.1029/2018wr022614 |
Water Resources Research 54/6 | 2019-09-06 |
| 2019 |
Ying Wang, Yuan Chai, Costas Soutis, Philip J. Withers Evolution of kink bands in a notched unidirectional carbon fibre-epoxy composite under four-point bending published pages: 143-152, ISSN: 0266-3538, DOI: 10.1016/j.compscitech.2019.01.014 |
Composites Science and Technology 172 | 2019-09-06 |
| 2018 |
S.C. Garcea, Y. Wang, P.J. Withers X-ray computed tomography of polymer composites published pages: 305-319, ISSN: 0266-3538, DOI: 10.1016/j.compscitech.2017.10.023 |
Composites Science and Technology 156 | 2019-09-06 |
| 2019 |
T. Sun, M.J. Roy, D. Strong, C. Simpson, P.J. Withers, P.B. Prangnell Weld zone and residual stress development in AA7050 stationary shoulder friction stir T-joint weld published pages: 256-265, ISSN: 0924-0136, DOI: 10.1016/j.jmatprotec.2018.08.022 |
Journal of Materials Processing Technology 263 | 2019-09-06 |
| 2019 |
Simpson C.A, Kozuki S, Lopez-Crespo P, Mostafavi M, Connolley T, Withers P.J Quantifying fatigue overload retardation mechanisms by energy dispersive X-ray diffraction published pages: 392-410, ISSN: 0022-5096, DOI: 10.1016/j.jmps.2018.10.020 |
Journal of the Mechanics and Physics of Solids 124 | 2019-09-06 |
| 2019 |
Xiangli Zhong, M. Grace Burke, Philip J. Withers, Xun Zhang, Xiaorong Zhou, Timothy L. Burnett, Yanwen Liu, Stuart B. Lyon, Simon R. Gibbon Multi-modal plasma focused ion beam serial section tomography of an organic paint coating published pages: 1-10, ISSN: 0304-3991, DOI: 10.1016/j.ultramic.2018.10.003 |
Ultramicroscopy 197 | 2019-09-06 |
| 2017 |
Jakob S Jørgensen, Sophia B Coban, William R B Lionheart, Samuel A McDonald, Philip J Withers SparseBeads data: benchmarking sparsity-regularized computed tomography published pages: 124005, ISSN: 0957-0233, DOI: 10.1088/1361-6501/aa8c29 |
Measurement Science and Technology 28/12 | 2019-09-06 |
| 2018 |
Justyna Kulczyk-Malecka, Xun Zhang, James Carr, Franck Nozahic, Claude Estournès, Daniel Monceau, Alexandra L. Carabat, Willem G. Sloof, Sybrand van der Zwaag, Philip J. Withers, Ping Xiao Thermo – mechanical properties of SPS produced self-healing thermal barrier coatings containing pure and alloyed MoSi 2 particles published pages: 4268-4275, ISSN: 0955-2219, DOI: 10.1016/j.jeurceramsoc.2018.04.053 |
Journal of the European Ceramic Society 38/12 | 2019-09-06 |
| 2017 |
Everth Hernández-Nava, Samuel Tammas-Williams, Christopher Smith, Fabien Leonard, Philip Withers, Iain Todd, Russell Goodall X-ray Tomography Characterisation of Lattice Structures Processed by Selective Electron Beam Melting published pages: 300, ISSN: 2075-4701, DOI: 10.3390/met7080300 |
Metals 7/8 | 2019-09-06 |
| 2019 |
S L Fisher, D J Holmes, J S Jørgensen, P Gajjar, J Behnsen, W R B Lionheart, P J Withers Laminography in the lab: imaging planar objects using a conventional x-ray CT scanner published pages: 35401, ISSN: 0957-0233, DOI: 10.1088/1361-6501/aafcae |
Measurement Science and Technology 30/3 | 2019-09-06 |
| 2018 |
Monica Jane Emerson, Ying Wang, Philip John Withers, Knut Conradsen, Anders Bjorholm Dahl, Vedrana Andersen Dahl Quantifying fibre reorientation during axial compression of a composite through time-lapse X-ray imaging and individual fibre tracking published pages: 47-54, ISSN: 0266-3538, DOI: 10.1016/j.compscitech.2018.08.028 |
Composites Science and Technology 168 | 2019-09-06 |
| 2017 |
S.C. Wu, T.Q. Xiao, P.J. Withers The imaging of failure in structural materials by synchrotron radiation X-ray microtomography published pages: 127-156, ISSN: 0013-7944, DOI: 10.1016/j.engfracmech.2017.07.027 |
Engineering Fracture Mechanics 182 | 2019-09-06 |
| 2018 |
Daniil Kazantsev, Jakob S Jørgensen, Martin S Andersen, William R B Lionheart, Peter D Lee, Philip J Withers Joint image reconstruction method with correlative multi-channel prior for x-ray spectral computed tomography published pages: 64001, ISSN: 0266-5611, DOI: 10.1088/1361-6420/aaba86 |
Inverse Problems 34/6 | 2019-09-06 |
| 2018 |
P. Lopez-Crespo, J.V. Peralta, P.J. Withers Synchrotron X-ray diffraction based method for stress intensity factor evaluation in the bulk of materials published pages: 72-77, ISSN: 0167-8442, DOI: 10.1016/j.tafmec.2018.09.010 |
Theoretical and Applied Fracture Mechanics 98 | 2019-09-06 |
| 2018 |
N.O. Larrosa, W. Wang, N. Read, M.H. Loretto, C. Evans, J. Carr, U. Tradowsky, M.M. Attallah, P.J. Withers Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy published pages: 123-133, ISSN: 0167-8442, DOI: 10.1016/j.tafmec.2018.09.011 |
Theoretical and Applied Fracture Mechanics 98 | 2019-09-06 |
| 2018 |
Xun Zhang, Yang Zhao, Philip J. Withers, Ping Xiao Microstructural degradation of Electron Beam-Physical Vapour Deposition Thermal Barrier Coating during thermal cycling tracked by X-ray micro-computed tomography published pages: 79-83, ISSN: 1359-6462, DOI: 10.1016/j.scriptamat.2018.04.010 |
Scripta Materialia 152 | 2019-09-06 |
| 2018 |
Xuekun Lu, Shelley D. Rawson, Philip J. Withers Effect of hydration and crack orientation on crack-tip strain, crack opening displacement and crack-tip shielding in elephant dentin published pages: 1041-1053, ISSN: 0109-5641, DOI: 10.1016/j.dental.2018.04.002 |
Dental Materials 34/7 | 2019-09-06 |
| 2018 |
T. Sun, A.S. Tremsin, M.J. Roy, M. Hofmann, P.B. Prangnell, P.J. Withers Investigation of residual stress distribution and texture evolution in AA7050 stationary shoulder friction stir welded joints published pages: 531-538, ISSN: 0921-5093, DOI: 10.1016/j.msea.2017.12.019 |
Materials Science and Engineering: A 712 | 2019-09-06 |
| 2018 |
Tristan Lowe, Egemen Avcu, Etienne Bousser, William Sellers, Philip Withers 3D Imaging of Indentation Damage in Bone published pages: 2533, ISSN: 1996-1944, DOI: 10.3390/ma11122533 |
Materials 11/12 | 2019-09-06 |
| 2018 |
Júlia López-Guimet, LucÃa Peña-Pérez, Robert S. Bradley, Patricia GarcÃa-Canadilla, Catherine Disney, Hua Geng, Andrew J. Bodey, Philip J. Withers, Bart Bijnens, Michael J. Sherratt, Gustavo Egea MicroCT imaging reveals differential 3D micro-scale remodelling of the murine aorta in ageing and Marfan syndrome published pages: 6038-6052, ISSN: 1838-7640, DOI: 10.7150/thno.26598 |
Theranostics 8/21 | 2019-09-06 |
Are you the coordinator (or a participant) of this project? Plaese send me more information about the "CORREL-CT" project.
For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.
Send me an email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.
Thanks. And then put a link of this page into your project's website.
The information about "CORREL-CT" are provided by the European Opendata Portal: CORDIS opendata.