RAILECT
"Development of an ultrasonic technique, sensors and systems for the volumetric examination of alumino-thermic rail welds"
| Coordinatore | TWI LIMITED
Organization address
address: Granta Park, Great Abington contact info |
| Nazionalità Coordinatore | United Kingdom [UK] |
| Sito del progetto | http://www.railect.com |
| Totale costo | 1˙486˙487 € |
| EC contributo | 1˙120˙350 € |
| Programma | FP7-SME
Specific Programme "Capacities": Research for the benefit of SMEs |
| Code Call | FP7-SME-2007-1 |
| Funding Scheme | BSG-SME |
| Anno di inizio | 2008 |
| Periodo (anno-mese-giorno) | 2008-09-01 - 2010-12-31 |
Partecipanti
| # | ||||
|---|---|---|---|---|
| 1 |
TWI LIMITED
Organization address
address: Granta Park, Great Abington contact info |
UK (CAMBRIDGE) | coordinator | 0.00 |
| 2 |
AINOOUCHAOU PLIROFORIKI AE
Organization address
address: L KIPHISIAS 116 KAI DAVAKI 1 contact info |
EL (ATHINA) | participant | 0.00 |
| 3 |
JARVIS PLC
Organization address
address: MERIDIAN HOUSE - THE CRESCENT contact info |
UK (YORK) | participant | 0.00 |
| 4 |
KAUNO TECHNOLOGIJOS UNIVERSITETAS
Organization address
address: K DONELAICIO 73 contact info |
LT (KAUNAS) | participant | 0.00 |
| 5 |
KINGSTON COMPUTER CONSULTANCY LIMITED
Organization address
address: WORSHIP STREET, CRYSTAL GATE 28-30 contact info |
UK (LONDON) | participant | 0.00 |
| 6 |
NETWORK RAIL INFRASTRUCTURE LIMITED
Organization address
address: 1 EVERSHOLT STREET contact info |
UK (LONDON) | participant | 0.00 |
| 7 |
PRZEDSIEBIORSTWO BADAWCZO-PRODUKCYJNE
Organization address
address: ul. Morelowskiego 30 contact info |
PL (Wroclaw) | participant | 0.00 |
| 8 |
SPREE ENGINEERING LTD
Organization address
address: CASTLE ROAD THE LABORATORY BRICK contact info |
UK (SITTINGBOURNE) | participant | 0.00 |
| 9 |
UNIVERSITY OF NEWCASTLE UPON TYNE
Organization address
address: Kensington Terrace 6 contact info |
UK (NEWCASTLE UPON TYNE) | participant | 0.00 |
| 10 |
VERMON SA
Organization address
address: RUE DU GENERAL RENAULT 180 contact info |
FR (TOURS CEDEX 1) | participant | 0.00 |
Mappa
Word cloud
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
Obiettivo del progetto (Objective)
'In 2004 an estimated 5 billion passenger journeys will be made in the UK, France and Germany and the market in the three countries is worth approximately €40 billion. [Ref. 1] . Based on the extrapolation of data relating to the UK, French and German railways [Ref 1], the 500,000 kms of rail [Ref. 2] on the European rail network has an average estimated 5000 rail breaks annually with about 1500 due to weld failure. Although the number of weld failures is relatively small compared to the estimated 11 million alumino-thermic welds on the European network, it still accounts for about 20% of the total 7000 rail failures each year [Ref. 3]. There is no current available NDT method for the economic and reliable volumetric examination of alumino-thermic welds. This proposal describes the development of a rapid ultrasonic method for the safe and reliable NDT examination of the entire volume of in-situ alumino-thermic welds. The proposed ultrasonic system could be quickly deployed on track using a clamp-on device. The inspection scans will be carried out in a pre-determined sequence, and then the results compared with defect acceptance criteria that will be generated in the project. To achieve this objective, a rigorous analysis of the material properties, the defect interaction with the ultrasonic beams and the design of optimum scanning procedures will first be carried out. It is expected that the scans will be implemented by means of electronic scanning using novel phased arrays and multiple probes. The acceptance criteria will be generated by both Engineering Critical Assessment and fatigue tests on rail samples.'
Altri progetti dello stesso programma (FP7-SME)
LEGUVAL (2013)
Valorisation of legumes co-products and by-products for package application and energy production from biomass
Read MoreFRUITGRADING (2012)
A LOW COST SORTING SOLUTION FOR THE FRUIT SECTOR BASED ON THE EVALUATION OF INTERNAL FRUIT QUALITY
Read MoreBIOCOPAC (2011)
Development of bio-based coating from tomato processing wastes intended for metal packaging
Read More