SINTEST
A RAPID NON-INVASIVE INSTRUMENT FOR DETERMINING THE GLOBAL AND LOCAL POROSITY OF PARTS MANUFACTURED BY POWDER METALLURGY
| Coordinatore | ATEKNEA SOLUTIONS HUNGARY KFT
Organization address
address: TETENYI UT 84-86 contact info |
| Nazionalità Coordinatore | Hungary [HU] |
| Totale costo | 1˙481˙610 € |
| EC contributo | 1˙095˙628 € |
| Programma | FP7-SME
Specific Programme "Capacities": Research for the benefit of SMEs |
| Code Call | FP7-SME-2007-1 |
| Funding Scheme | BSG-SME |
| Anno di inizio | 2008 |
| Periodo (anno-mese-giorno) | 2008-10-01 - 2010-10-31 |
Partecipanti
| # | ||||
|---|---|---|---|---|
| 1 |
ATEKNEA SOLUTIONS HUNGARY KFT
Organization address
address: TETENYI UT 84-86 contact info |
HU (BUDAPEST) | coordinator | 0.00 |
| 2 |
DANALCO WEAR & WELDING TECHNOLOGY V/ LONE RONDTVED CHODAVARAPU
Organization address
address: VESTRE BOULEVARD 4 contact info |
DK (AARS) | participant | 0.00 |
| 3 |
FUNDACIO CTM CENTRE TECNOLOGIC
Organization address
address: PLACA DE LA CIENCIA 2 contact info |
ES (MANRESA BARCELONA) | participant | 0.00 |
| 4 |
GEORG SCHLIEPER INGENIEURBURO GAMMATEC
Organization address
address: ALLEESTRASSE 101 contact info |
DE (REMSCHEID) | participant | 0.00 |
| 5 |
MARCOS FRANCISCO NAVARRO GOMEZ
Organization address
address: AV JOSE MA TORRES MURCIANO B.12.1.1 contact info |
ES (MARBELLA) | participant | 0.00 |
| 6 |
MULTITEST LTD
Organization address
address: ATANAS DALCHEV STR. 1 contact info |
BG (VARNA) | participant | 0.00 |
| 7 |
SINTER PRES SL
Organization address
address: PASAJE ARQUIMEDES SN NAVE C contact info |
ES (BARBERA DEL VALLES) | participant | 0.00 |
| 8 |
TKI FERRIT FEJLESZTO ES GYARTO KORLATOLT FELELOSSEGU TARSASAG
Organization address
address: UNGVAR UTCA 64-66 contact info |
HU (BUDAPEST) | participant | 0.00 |
| 9 |
TOZMETAL TICARET VE SANAYI.A.S
Organization address
address: "Istanbul caddesi, Gurpinarkoyu-Buyukcekmece" contact info |
TR (Istanbul) | participant | 0.00 |
| 10 |
UNIVERSITAT POLITECNICA DE CATALUNYA
Organization address
address: Jordi Girona 31 contact info |
ES (BARCELONA) | participant | 0.00 |
Mappa
Word cloud
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
Obiettivo del progetto (Objective)
'Powder Metallurgy (P/M) is a major manufacturing route for many industries. While the demand for P/M parts in its traditional automotive market is predicted to grow, future sector expansion depends directly upon its capability to manufacture zero-defect, complex mechanical P/M parts for industries such as aerospace and medicine. To comply with such standards, parts manufacturing must be optimized. However, consortium SMEs lack time-efficient and systematic instruments and procedures for the inspection of the inner structure of parts, as well as expert guidance to solve the complex problem of P/M, zero-defect optimization, constituting this a significant threat to their cost-effectiveness and competitiveness within the industry. The lack of an adequate inspection system has important implications from the point of view of quality assurance, since it increases the design costs and the time of a tool set for a new product, which is made with a trial-and-error procedure and which generates surplus costs. Consortium SMEs have identified a clear need for a non-invasive instrument for determining the porosity of P/M parts. The proposed SINTEST technology will increase consortium SME Powder Metallurgy competitive advantage by offering a highly effective and cost-efficient in-situ system that can detect deficiencies in sintered parts. Through the project, a new efficient and cost-effective inspection tool will be developed based on ultrasonic technology, which makes it possible to provide a global density map of sintered parts. The commercial objective of this SINTEST proposal is the development of a technology to better control the P/M output into the market, increasing manufacturer reliability for the supply of complex parts and EU competitiveness, as well as opening up a host of new markets for the sector, both within Europe and worldwide.'
Altri progetti dello stesso programma (FP7-SME)
ECOARTISNOW (2011)
"Snow generation with reduced energy consumption and noise emission, more consistent quality and extended operating temperature ranges"
Read MoreRAMPAWARE (2013)
Development of a robust cost-effective collision awareness and avoidance system for ground support equipment operating on the airport ramp
Read MoreCREEPTEST (2013)
"Development of a high sensitivity ultrasonic phased array Non-Destructive Testing (NDT) method for the early detection of creep damage (Type IV cracking) in alloy steels used in high temperature, high"
Read More