SIGNASTIR
Development of an in-process quality assurance system for friction stir welding
| Coordinatore | TWI LIMITED
Organization address
address: Granta Park, Great Abington contact info |
| Nazionalità Coordinatore | United Kingdom [UK] |
| Totale costo | 1˙199˙889 € |
| EC contributo | 924˙835 € |
| Programma | FP7-SME
Specific Programme "Capacities": Research for the benefit of SMEs |
| Code Call | FP7-SME-2010-1 |
| Funding Scheme | BSG-SME |
| Anno di inizio | 2011 |
| Periodo (anno-mese-giorno) | 2011-02-01 - 2013-05-31 |
Partecipanti
| # | ||||
|---|---|---|---|---|
| 1 |
TWI LIMITED
Organization address
address: Granta Park, Great Abington contact info |
UK (CAMBRIDGE) | coordinator | 65˙000.00 |
| 2 |
BCT STEUERUNGS UND DV-SYSTEME GMBH
Organization address
address: Carlo-Schmid-Allee 3 contact info |
DE (DORTMUND) | participant | 213˙200.00 |
| 3 |
HENRIK NIKOLAJ BLICHER SCHMIDT
Organization address
address: ERDALSVEJ 1 contact info |
DK (GLOSTRUP) | participant | 198˙291.00 |
| 4 |
Inspectahire Instrument Co. Ltd
Organization address
address: Ferniegair Avenue 1 contact info |
UK (Helensburgh) | participant | 193˙041.00 |
| 5 |
RUBITECH BV
Organization address
address: Ruxveenseweg 4 contact info |
NL (Steenwijk) | participant | 175˙303.00 |
| 6 |
Swerea KIMAB AB
Organization address
address: PO BOX 7047 contact info |
SE (KISTA) | participant | 40˙000.00 |
| 7 |
SAPA AB
Organization address
address: Humlegardsgatan 17 contact info |
SE (STOCKHOLM) | participant | 25˙000.00 |
| 8 |
Instytut Spawalnictwa
Organization address
address: Bl. Czeslawa 16-18 contact info |
PL (Gliwice) | participant | 15˙000.00 |
| 9 |
HBS ENGINEERING APS
Organization address
address: ERDALSVEJ 1 contact info |
DK (GLOSTRUP) | participant | 0.00 |
Mappa
Word cloud
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
Obiettivo del progetto (Objective)
'The SignaStir project will develop an effective in-process quality assurance system for the inspection of friction stir welds (FSW) predominantly used in the manufacture of aluminium rolling stock and marine vessels. The SignaStir system will determine the unique and holistic weld quality ‘signature’. There is currently no capable inspection system available on the market either as a stand-alone unit or integrated with a welding machine to perform this task. Welding is an enabling manufacturing technology for joining materials, which directly affects cost, safety and reliability and therefore has significant economic impact. Production and supply of flawed or defective welds is unacceptable and may result in unsafe products of low structural integrity. To overcome the technical barriers to development of such an inspection system an SME partnership will require the services of research and technology providing organisations to deliver precompetitive research leading to the development of the product. There is a need for a low cost welding method, which can overcome the limitations of conventional fusion welding techniques. FSW has many economic, environmental and safety advantages over conventional welding but is a relatively new development and potential users require added confidence to make the initial capital investment required. The full benefit of the FSW process can only be achieved through application where weld quality is guaranteed to be correct each and every time. When developed the SignaStir system will give European manufacturers added confidence in their welded products and reduce costly off-line inspection of production parts. Scrap and re-work rates will be reduced as quality issues will be detected immediately after welding by the SignaStir system.'
Introduzione (Teaser)
Friction stir welding (FSW) is positively impacting industries in the aerospace, marine and automotive sectors. Previously lacking in-line quality inspection technology should enhance market penetration.