Explore the words cloud of the STEPWISE project. It provides you a very rough idea of what is the project "STEPWISE" about.
The following table provides information about the project.
Coordinator |
NEDERLANDSE ORGANISATIE VOOR TOEGEPAST NATUURWETENSCHAPPELIJK ONDERZOEK TNO
Organization address contact info |
Coordinator Country | Netherlands [NL] |
Project website | http://www.stepwise.eu |
Total cost | 12˙988˙996 € |
EC max contribution | 12˙968˙371 € (100%) |
Programme |
1. H2020-EU.3.3.2.3. (Develop competitive and environmentally safe technologies for CO2 capture, transport, storage and re-use) |
Code Call | H2020-LCE-2014-1 |
Funding Scheme | RIA |
Starting year | 2015 |
Duration (year-month-day) | from 2015-05-01 to 2019-04-30 |
Take a look of project's partnership.
# | ||||
---|---|---|---|---|
1 | NEDERLANDSE ORGANISATIE VOOR TOEGEPAST NATUURWETENSCHAPPELIJK ONDERZOEK TNO | NL (DEN HAAG) | coordinator | 433˙672.00 |
2 | SWERIM AB | SE (LULEA) | participant | 7˙592˙212.00 |
3 | STICHTING ENERGIEONDERZOEK CENTRUM NEDERLAND | NL (PETTEN) | participant | 3˙031˙350.00 |
4 | JOHNSON MATTHEY PLC | UK (LONDON) | participant | 415˙237.00 |
5 | POLITECNICO DI MILANO | IT (MILANO) | participant | 330˙625.00 |
6 | KISUMA CHEMICALS BV | NL (VEENDAM) | participant | 300˙000.00 |
7 | UNIVERSITATEA BABES BOLYAI | RO (CLUJ NAPOCA) | participant | 262˙000.00 |
8 | SSAB EMEA AB | SE (OXELOESUND) | participant | 256˙883.00 |
9 | AMEC FOSTER WHEELER ITALIANA SRL | IT (CORSICO) | participant | 227˙140.00 |
10 | TATA STEEL UK CONSULTING LIMITED | UK (LONDON) | participant | 119˙250.00 |
STEPWISE is a solid sorption technology for CO2 capture from fuel gases in combination with water-gas shift and acid gas removal. The main objectives of the proposed STEPWISE project is to scale up the technology for the CO2 capture from Blast Furnace Gases (BFG) with three overall demonstration goals in comparison to state-of-the-art amine-based technologies:
• Higher carbon capture rate – i.e. lower carbon intensity, 85% reduction • Higher energy efficiency – i.e. lower energy consumption for capture (SPECCA ), 60% reduction • Better economy – i.e. lower cost of CO2 avoided, 25% reduction
The STEPWISE project will achieve this by the construction and the operation of a pilot test installation at a blast furnace site enabling the technology to reach TRL6 as the next step in the research, development and demonstration trajectory. Hence further reducing the risk of scaling up the technology.
The STEPWISE project has the potential to decrease CO2 emissions worldwide by 2.1Gt/yr based on current emission levels. The conservative estimate is that by 2050, a potential cost saving of 750 times the research costs for this project will be realized each year every year, with a much larger potential. The overall objective is to secure jobs in the highly competitive European steel industry, a sector employing 360 thousand skilled people with an annual turnover of €170 billion.
Preliminary assessment of the most promising industrial applications | Documents, reports | 2020-04-01 17:48:17 |
Promotional advertisement of piloting facility | Websites, patent fillings, videos etc. | 2020-04-01 17:48:17 |
Carbon capture summit | Websites, patent fillings, videos etc. | 2020-04-01 17:48:17 |
Public project website | Websites, patent fillings, videos etc. | 2020-04-01 17:48:16 |
Take a look to the deliverables list in detail: detailed list of STEPWISE deliverables.
year | authors and title | journal | last update |
---|---|---|---|
2019 |
Letitia Petrescu, Dora-Andreea Chisalita, Calin-Cristian Cormos, Giampaolo Manzolini, Paul Cobden, H. van Dijk Life Cycle Assessment of SEWGS Technology Applied to Integrated Steel Plants published pages: 1825, ISSN: 2071-1050, DOI: 10.3390/su11071825 |
Sustainability 11/7 | 2020-04-01 |
2019 |
G. Manzolini 1, F. Cinalli 1, A. Giuffrida 1, P.D. Cobden 2, H.A.J. van Dijk 2, L. Mancuso 3, F. Consonni 3, L. Hooey 4, M. Sundquist 4, J. Johns 5
1Politecnico di Milano, Dipartimento di Energia, via Lambruschini 4, 20126, Milano, Italy
2TNO, Westerduinweg 3, 1755 LE Petten, The Netherlands
3Amec Foster Wheeler Italiana, Via S. Caboto 15, 20094, Corsico(Milano) ,Italy
4Swerea Mefos, Aronstorpsvägen 1, 974 37 Luleå, Sweden
5Tata Steel UK Consulting Ltd., PO Box 30, Stephenson Street, Newport, South Wales NP19 0RB, United Kingdom SEWGS Application to Integrated Steel-Plant for CO2 Emission Mitigation: Assessment of the Energy Penalty and Cost of CO2 Avoided published pages: , ISSN: , DOI: |
Greenhouse Gas Technology Conference (GHGT-14) | 2020-04-01 |
2019 |
H.A.J. van Dijk 1 , P.D. Cobden 1, M. Lundqvist 2, L. Petrescu 3, L. Lukashuk 4, G. Manzolini 5, S. van der Veer 6, L. Mancuso 7, J. Johns 8, D. Bellqvist 9
1 TNO, Westerduinweg 3, 1755 LE Petten, The Netherlands
2 Swerea Mefos, Aronstorpsvägen 1, 974 37 Luleå, Sweden
3 Universitatea Babes-Bolyai, Strada Mihail Kogălniceanu 1, Cluj-Napoca 400084, Romania
4 Johnson Matthey, PO Box 1, Belasis Avenue, Billingham, Cleveland, TS23 1LB, United Kingdom
5 Politecnico di Milano, Piazza Leonardo da Vinci, 32, 20133 Milano, Italy
6 Kisuma Chemicals, Billitonweg 7, 9641 KZ Veendam, The Netherlands
7 Amec Foster Wheeler Italiana S.r.l., Via S. Caboto, 15, 20094 Corsico (Milano), Italy
8 Tata Steel UK Consulting Ltd., PO Box 30, Stephenson Street, Newport, South Wales NP19 0RB, United Kingdom
9 SSAB, Svartöns Industriområde, 971 88 Luleå, Sweden Cost Effective CO2 Reduction in the Iron & Steel Industry by Means of the SEWGS Technology: STEPWISE Project published pages: , ISSN: , DOI: |
Greenhouse Gas Technology Conference (GHGT-14) | 2020-04-01 |
2018 |
H. A. J. (Eric) van Dijk, Paul D. Cobden, Liliana Lukashuk, Leon van de Water, Magnus Lundqvist, Giampaolo Manzolini, Calin-Cristian Cormos, Camiel van Dijk, Luca Mancuso, Jeremy Johns, David Bellqvist STEPWISE Project: Sorption-Enhanced Water-Gas Shift Technology to Reduce Carbon Footprint in the Iron and Steel Industry published pages: 395-402, ISSN: 2056-5135, DOI: 10.1595/205651318X15268923666410 |
Johnson Matthey Technology Review 62/4 | 2020-04-01 |
2017 |
H.A.J. van Dijk, P.D. Cobden, M. Lundqvist, C.C. Cormos, M.J. Watson, G. Manzolini, S. van der Veer, L. Mancuso, J. Johns, B. Sundelin Cost Effective CO2 Reduction in the Iron & Steel Industry by Means of the SEWGS Technology: STEPWISE Project published pages: 6256-6265, ISSN: 1876-6102, DOI: 10.1016/j.egypro.2017.03.1764 |
Energy Procedia 114 | 2020-04-01 |
2018 |
Letitia Petrescu, Dora-Andreea Chisalita, Calin-Cristian Cormos, Giampaolo Manzolini, Paul Cobden, Eric H.A.J. van Dijk Environmental assessment of carbon capture and storage technologies applied to steel production published pages: P5.26, ISSN: , DOI: |
23rd International Congress of Chemical and Process Engineering - CHISA 2018 1 | 2020-04-01 |
2019 |
Dora-Andreea Chisalita, Letitia Petrescu, Paul Cobden, H.A.J (Eric) van Dijk, Ana-Maria Cormos, Calin-Cristian Cormos Assessing the environmental impact of an integrated steel mill with post-combustion CO2 capture and storage using the LCA methodology published pages: 1015-1025, ISSN: 0959-6526, DOI: 10.1016/j.jclepro.2018.11.256 |
Journal of Cleaner Production 211 | 2020-04-01 |
Are you the coordinator (or a participant) of this project? Plaese send me more information about the "STEPWISE" project.
For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.
Send me an email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.
Thanks. And then put a link of this page into your project's website.
The information about "STEPWISE" are provided by the European Opendata Portal: CORDIS opendata.