AFLOG
"Advanced Floor Grids for Green Regional A/C New Concept of Design, Manufacturing and Installation in Ground Full Scale Demo"
| Coordinatore | OFFICINE MECCANICHE IRPINE SRL
Organization address
address: AREA INDUSTRIALE CALAGGIO SNC contact info |
| Nazionalità Coordinatore | Italy [IT] |
| Totale costo | 2˙184˙000 € |
| EC contributo | 1˙466˙000 € |
| Programma | FP7-JTI
Specific Programme "Cooperation": Joint Technology Initiatives |
| Code Call | SP1-JTI-CS-2012-01 |
| Funding Scheme | JTI-CS |
| Anno di inizio | 2012 |
| Periodo (anno-mese-giorno) | 2012-11-05 - 2014-04-04 |
Partecipanti
| # | ||||
|---|---|---|---|---|
| 1 |
OFFICINE MECCANICHE IRPINE SRL
Organization address
address: AREA INDUSTRIALE CALAGGIO SNC contact info |
IT (LACEDONIA AV) | coordinator | 1˙466˙000.00 |
Mappa
Word cloud
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
Obiettivo del progetto (Objective)
'Pax Floor and Cargo Floor configuration based on a new manufacturing process here called Progressive Roll Forming (PRF) of ThermoPlastic Carbon Reinforced Polimers (TPCRP) is presented. The process basically applies to seat rails and longerons. Raw material flows into the manufacturing device continuosly; one or more plane sheets, are progressively heated, bended and compacted each other by rollers to achieve the desired shape i.e. C-Shape, J-Shape, H-Shape, etc. After floor grid configuration design and sizing, fixtures, jigs and moulds will be designed and manufactured for each component of the floor grid. In order to set up the new process PRF equipment will be manufactured. Tools and fixtures for final assembly will be designed and manufactured, then the technological demonstrator i.e. test article floor grid will be manufactured. Main innovative features are focused on cost saving due to process automation; this enable the use of thermoplastics with consequent weight saving for Pax and Cargo Floor Grid and, at the same time, recycling and mantainiability features are improved with a positive impact on environmental and life cycle management of the product.'