DEVAPRO
Development of a variable warm forging process chain
| Coordinatore | IPH - Institut fur Integrierte Produktion Hannover gemeinnutzige GmbH
Organization address
address: Hollerithallee 6 contact info |
| Nazionalità Coordinatore | Germany [DE] |
| Sito del progetto | http://www.devapro.de |
| Totale costo | 1˙580˙595 € |
| EC contributo | 1˙117˙149 € |
| Programma | FP7-SME
Specific Programme "Capacities": Research for the benefit of SMEs |
| Code Call | FP7-SME-2007-1 |
| Funding Scheme | BSG-SME |
| Anno di inizio | 2009 |
| Periodo (anno-mese-giorno) | 2009-01-01 - 2010-12-31 |
Partecipanti
| # | ||||
|---|---|---|---|---|
| 1 |
IPH - Institut fur Integrierte Produktion Hannover gemeinnutzige GmbH
Organization address
address: Hollerithallee 6 contact info |
DE (Hannover) | coordinator | 36˙343.35 |
| 2 |
KOVARNA VIVA ZLIN SPOL SRO
Organization address
address: tr .T. Bati. c.p. 5266 contact info |
CZ (Zlin) | participant | 406˙986.59 |
| 3 |
OMTAS OTOMOTIV TRANSMISYON AKSAMI SANAYI VE TICARET ANONIM SIRKETI
Organization address
address: KARAYOLU UZERI E5 contact info |
TR (KOCAELI) | participant | 309˙484.77 |
| 4 |
EMA-TEC GMBH
Organization address
address: AM KALKHUGEL 8 contact info |
DE (Sondershausen) | participant | 227˙058.82 |
| 5 |
BEMERS & CO SPRUHTECHNIK UND VORRICHTUNGSBAU GMBH
Organization address
address: GUTENBERGSTRASSE 5A contact info |
DE (KAARST BUTTGEN) | participant | 114˙693.31 |
| 6 |
GOTTFRIED WILHELM LEIBNIZ UNIVERSITAET HANNOVER
Organization address
address: Welfengarten 1 contact info |
DE (HANNOVER) | participant | 17˙662.99 |
| 7 |
S.C. METAV CERCETARE DEZVOLTARE SA
Organization address
address: STRADA C A ROSETTI 31 SC 2 ET 2 contact info |
RO (BUCURESTI) | participant | 4˙919.17 |
| 8 |
FORJA NEPTUN SRL
Organization address
address: STRADA BOBALNA 57-63 contact info |
RO (CAMPINA) | participant | 0.00 |
Mappa
Word cloud
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
Obiettivo del progetto (Objective)
'The geometrical spectrum of current warm forging processes is limited concerning the mass distribution of the final work piece geometry. The more the mass distribution varies along the longitudinal axis, the more press operations are necessary, as the tool material can only withstand limited loads. Additional forming operations have a negative impact on the achievable tolerances. This is caused by the manual work piece transfer which is a prerequisite to produce small and medium sized batches as SMEs do. Against the background of rising market opportunities for high quality warm forged products, in the project DeVaPro – 'Development of a Variable warm forging Process' a warm forging process is developed, enabling the forges to produce more complex geometries and thus making the warm forging technology more variable. Additionally, the replacement of heat-treatable steels by low alloy steels due to improved work piece properties of warm forged products and the potential for light weight design is investigated. To reach those goals, new technologies, namely a warm rolling operation and an induction reheating process are developed and embedded within an established warm forging process chain. The integration of these operations enables the forges to increase the output, improve the final work piece properties and broaden the spectrum of producible geometries.'
Altri progetti dello stesso programma (FP7-SME)
NANOFLEX (2010)
An Universal Flexible Low-cost Plumbing and Heating pipe system fully Environment-compatible by using innovative Nanoparticle technology
Read MoreFOODSCAN (2011)
"DEVELOPMENT OF AN AUTOMATED, NOVEL BIOSENSOR PLATFORM FOR PESTICIDE RESIDUE DETECTION"
Read MoreAPTAR (2009)
"GLOBAL SOLUTION FOR SLAUGHTERHOUSES, TANNERIES AND PHYTOSANITARY SECTORS: TREATMENT OF CATEGORY 3 ANIMAL WASTES AND PRODUCTION HIGH VALUE PRODUCT WITH BIO-PESTICIDE PROPERTIES"
Read More